Analysis: Use of brushless motors grows for factory floor and beyond

Brushless permanent magnet (PM) motors continue to evolve into high torque, high efficiency, smaller sized packages. They currently dominate electric motors in office automation, medical instruments, and a wide range of factory floor automation applications (including robots, semiconductor equipment, material handling, packaging machines, nut runners, machine tool drives). Now, they are beginning to move into lower-cost, high-volume automotive and appliance applications, albeit in selective cases.

01/02/2008


Thousand Oaks, CA — Brushless permanent magnet (PM) motors continue to evolve into high torque, high efficiency, smaller sized packages. They currently dominate electric motors in office automation (such as printers, disk drives, CDs, DVDs, and photocopiers), medical instruments (centrifuges, blood analysis, CAT scans, metering pumps), and a wide range of factory floor automation applications (including robots, semiconductor equipment, material handling, packaging machines, nut runners, machine tool drives). Now, they are beginning to move into lower-cost, high-volume automotive and appliance applications, albeit in selective cases.

Brushless PM motors — also known as brushless dc, brushless ac synchronous, and brushless servo motors, among others — have benefited from the discovery of rare earth magnets, best represented by samarium cobalt and neodymium-iron-boron types. Magnet manufacturers continue to improve incrementally the rare earth magnet’s magnetic energy levels, approaching 55 mega-gauss-oersteds. An Olympic weightlifter would find it difficult to pull such a magnet off the refrigerator.

Concurrent development of solid-state devices in the form of integrated circuits (ICs), power modules (inverters), microprocessors, and digital signal processors (DSPs) is providing the impetus for cost effective drives with electronic commutation approaching $10 in some high-volume-speed based applications. Integrating power and control functions equips the motion control user with the tools needed to construct a full motion control system. This continuous revolution in power and control electronics gives these devices the capability to expand into new applications.

The brushless PM motor is considered an excellent servo motor. Its high-torque and high-power efficiency allows for its use in smaller devices and machines. Although servo motors are used in precision position applications, in high performance incremental motion application, efficiency plays a direct role in terms of minimizing losses, thereby providing the motor with superior thermal performance. Lower eddy currents, hysteresis, and parasitic losses in the motor mean more thermal headroom and higher torque levels.

Today’s motor design engineer has superior design simulation tools available to take advantage of more customized brushless PM motors with improved performance. All motor types benefit from FEA (finite element analysis) and global simulation tools. The intrinsic performance advantage of the brushless PM motor and the latest integrated drives will promote new applications, particularly in power applications of 10 kW and lower.

For more on servo systems, see Product Research article on servo motors, p. 54, in the January 2008 Control Engineering North American edition, available online at www.controleng.com/archive

Where are you starting to apply brushless permanent magnet motors that you hadn't previously? Have any questions or recommendations about the use or application of these motors?

Use the "Post a comment" feature linked here, and to the right, to share your views

.

Dan Jones

,

Incremotion Associates

, for the Control Engineering News Desk
( Register here and scroll down to select your choice of eNewsletters free .)





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.