Apple to build major fuel cell installation for data center

Green power for your iCloud application will come from natural gas and solar.

04/05/2012


Apple is building a new data center that will feature two cutting edge sustainable power schemes, photovoltaics and fuel cells. This in itself is interesting, but the fact that it is being built in North Carolina and not the left coast is particularly curious. (Full disclosure: My family and I own many Apple products and have been users since buying our first 512k Macintosh in 1985. I still have it. Don’t ask me why we thought we needed a computer back then.)

The initial plan for the site calls for a 4.8 MW fuel cell facility, which they are characterizing as the largest private (i.e., non-utility company) installation in the U.S. Bloom Energy is providing the solid oxide fuel cells (SOFCs) for the project that will be fueled with natural gas. This specific fuel cell technology is simple and very efficient (in fuel cell terms) but runs at high temperatures, usually in the 800 to 1,000 °C neighborhood, which normally limits it to larger stationary installations. At that temperature, natural gas can be reformed into hydrogen which the cell uses. The leftover carbon atom combines with atmospheric oxygen and goes out the stack as carbon dioxide. So, even if there is no combustion, there is a greenhouse gas aspect to it, albeit a small one in that the fuel cell produces more electricity per unit of natural gas than normal combustion technologies. Efficiencies of SOFCs are normally >60% even if you don’t capture the waste heat. (Read a Control Engineering article from 2007 on fuel cell technologies.)

I haven’t seen any indication if Apple plans on recovering the waste heat off the fuel cells. Given the high temperature of SOFCs, some installations have used a recovered heat boiler similar to those used in a combined-cycle gas turbine facility. If they aren’t using it to make steam, I’m not sure what you would do with that much heat at a giant server farm.

This project isn’t cheap, but if any company has the cash to undertake something on this scale, it’s Apple. Estimates suggest it will cost around $30 million for that generating capacity. However, once they’re past the initial cost, generating costs are very low and reliability is exceptionally high, hence its desirability for a data center. The next construction phase planned is a 20 MW photovoltaic installation, much larger than any other in the state.

Now, where did I put my iPad?



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.