ARC: Process automation faces growth decline

Automation supplier revenues continued to fall throughout 2009 as compared to 2008. Dedham, MA-based ARC Advisory Group expects that year-on-year comparisons between 2008 and 2009 will experience a decline, with modest growth in 2010. ARC sees signs that the manufacturing recovery has begun but its continued success depends on the ability of the financial markets to return to normal functioning.

03/01/2010


 

 

 

Automation supplier revenues continued to fall throughout 2009 as compared to 2008. Dedham, MA-based ARC Advisory Group expects that year-on-year comparisons between 2008 and 2009 will experience a decline, with modest growth in 2010. ARC sees signs that the manufacturing recovery has begun but its continued success depends on the ability of the financial markets to return to normal functioning.

 

Small, medium and large businesses have all been strained by the inability to access short-term capital. Many businesses have simply delayed capital equipment expansions, particularly if they manufactured components in the automotive supply chain.

 

Although the short-term forecast for the global automation expenditures for the process industries looks bleak, ARC expects moderate market growth to resume during the latter part of the five-year forecast period. Once the economic turmoil settles, the globalization environment will resume, which will once again cause manufacturing companies to invest in capital expenditures.

 

“Manufacturers will continually face challenges to raise productivity, lower product costs, reduce plant operating expenses, and increase return on investment to compete in the global market. Consequently, capital investments for automation should resume across many industries,” according to senior analyst David Clayton ( dclayton@arcweb.com ), the principle author of ARC’s Automation Expenditures for Process Industries Worldwide Outlook.

 

It is not often that price erosion becomes a major concern in the automation sector. However, industry veterans have experienced double-digit price decreases. There are several reasons for this, but the net effect is that the market will have difficulty growing even in the high single-digit range over the next five years.

 

One element contributing to the price erosion is that controllers are rapidly becoming an automation commodity in some sectors. Differentiation between products, capabilities, and performance factors is rapidly diminishing.

 

With the commoditization of control equipment, many automation suppliers are differentiating themselves by broadening the scope of services offered to include front-end engineering and design, operations, outsourced maintenance and performance improvement. Users and suppliers benefit from a more collaborative relationship. Users can leverage the expertise of suppliers to help manage plant assets across their entire lifecycle. Suppliers can go beyond being just automation providers, enhance their project revenues.

 

With the global economic uncertainty and ongoing lack of consumer demand, manufacturers are putting more thought into whether they should replace or simply repair their automation equipment. Since automation repairs are often less expensive than replacement, it is reasonable to expect to see a jump in repair business during an economic slowdown.

 

To take full advantage of this opportunity, suppliers should make sure that they are in a position to provide repair and maintenance services, not just on their own products, but also on products manufactured by other suppliers.

 

To take full advantage of the relatively high level of industrial and infrastructure growth in regions, suppliers should continue to invest in improving their distribution channels including production facilities, sales, service, and repair locations in developing regions. This can open new markets for conventional and low-cost automation options, breathing new life into these older-generation products, which have been steadily declining as sales of intelligent solutions continue to grow.

 

For more information, go to: www.arcweb.com/res/auto-process.

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.