Automation Integrator Guide, 2011 articles

The Automation Integrator Guide 2011 articles included with December 2010 print and digital edition of Control Engineering and Plant Engineering are linked in this table of contents, with a connection to the often updated Automation Integrator Guide online directory to automation system integrators.

December 16, 2010

Table of contents for the Automation Integrator Guide 2011, included with December 2010 print and digital edition of Control Engineering and Plant Engineering follows, with links below; connect also to the often-updated online Automation Integrator Guide online director to automation system integrators.

System Integrator of the Year, 2011 winners- Automation System Integrator Awards: Control Engineering recognizes the best in automation, controls, and instrumentation system integration with our fifth annual System Integrator of the Year awards.

Tutorial: Stay Involved, Get the Most from an Automation Project – Automation system integrators advise end users to keep track of what’s happening at every stage of an automation project. Here’s what to watch for to ensure you get what you want.

CSIA 2010: Growth, Change – Control System Integrators Association provides a positive state-of-the-association look at 2010.

Automation Integrator Guide online – Find an integrator for your next automation project.

ONLINE extra 

See prior winners of the Control Engineering System Integrator of the Year recognition in the System Integrator Hall of Fame.

Think Again: Time for automation system integration – Gain efficiency through tighter control system integration.

Integrating Disparate Control Systems – Advancements in open systems and network technologies are showing vendors and manufacturers alike that ‘playing nice on the same wire’ can build bridges between once-isolated islands of automation and reap benefits for everyone.

Process Models, Advanced Control Support Super Steel Mill – Extensive system integration and custom advanced control software supports one of only four cold mills in the U.S. coupled to a pickle line. The mill automation system supports a continuous process requiring precision control of motor speeds and integration of auxiliary equipment.

Automation Integrator Guide digital edition shows see how the articles above appeared in print.

Control Engineering December 2010 edition article archive page – browse for other articles of interest.

Link to the Plant Engineering December 2010 digital edition.