Beacon light for indoor or outdoor status indication, wireless push button

Banner's K50 Beacon Light is designed for high visibility and indoor, outdoor applications, helping with industrial human-machine interactions. Also, the K50L provides wireless push button capabilities.

07/21/2011


Banner Engineering Corp. EZ-Light K50 Beacon Light to its extensive line of lighting and indicators, helps with various human-machine interactions. See below for information about the K50-L, a wireless push button in the same product line.

Banner Engineering EZ-Light K50Providing intense levels of light output from all directions, the new beacon light is designed to be a solution where high brightness is needed, including indoor and outdoor environments. Due to its high visibility, the K50 is an ideal lighting solution for a wide range of applications, including general status indication such as gate entrances, and for areas with high levels of ambient light that would normally wash out a standard indicator light. 

The EZ-Light K50 Beacon Light is available in perimeter and perimeter plus top view models, providing complete visibility around the entire area. With 1- or 2-color light model options, operators can select between multiple LED colors for their desired application. Cabled and Quick Disconnect models are also available.

Featuring rugged, sealed thermoplastic housing rated for IP67 and IP69K, the K50 reportedly ensures effective operation in harsh outdoor environments, in addition to indoor environments where dust or water may be present. Operation varies depending on the model, with 12 to 30 V dc or 85 to 130 V ac (75 to 120 V dc).

Wireless: EZ-Light K50L push button

EZ-LIGHT K50L push-button is mapped to a dry contact output and is designed for use with wireless sensor networks, specifically Banner SureCross FlexPower battery-operated devices. Operating independently from its attached wireless device, the K50L push-button consumes minimal power for electrical circuits or control, while three sourcing inputs control the green, yellow and red indicator lights. The K50L's power-optimized electronics, combined with Banner’s reliable SureCross wireless network, provide an ideal solution for call lights and machine status indication—even for remote areas without wired power or data connections.

- Edited by Chris Vavra, Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.