Beyond the 'break-fix’ mentality is a smarter, safer workplace

Hesh Kagan, the 'Wizard of Wireless,’ was in our offices last month chatting about some new initiatives on sensors. The talk turned to low-cost sensors that would bring the cost of predictive maintenance down to the level where it was cheaper to measure equipment than to simply wait for it to break.

07/15/2007


Hesh Kagan, the 'Wizard of Wireless,’ was in our offices last month chatting about some new initiatives on sensors. The talk turned to low-cost sensors that would bring the cost of predictive maintenance down to the level where it was cheaper to measure equipment than to simply wait for it to break.

A 'break-fix’ mentality, Kagan said, is the maintenance standard at most process facilities %%MDASSML%% a fairly provocative position to take. Given the squeeze in capital costs, most industry experts are quick to point out that stretching the useful life of plant floor equipment is necessary to ensure profitable operations. Yet, Kagan contends the equipment is viewed in many facilities as easier to replace than it is to monitor and maintain.

If he’s right, how quickly can we outsource that kind of thinking to another country? We don’t need it here.

PLANT ENGINEERING ’s readers were asked about this issue as part of the “Changing Role of the Plant Engineer” study. The preliminary results will be released later this month at Maximo World in Orlando. They tell an interesting story. Asked what’s the most important factor affecting their business, reducing maintenance costs ranked fourth. Driving safe and secure operations, gratefully, came in first.

Still, it’s worth observing that in many facilities, maintaining people and maintaining equipment is viewed in much the same light %%MDASSML%% and it’s likely a pretty dim light at that. Machines break down and are replaced. Humans break down as well, victims of workplace injuries and unsafe work conditions, and are seen by a few plant managers and plant executives as just as interchangeable as your average gear.

In general, the U.S. workplace is safer. Every OSHA statistic shows it. Yet there are still too many facilities %%MDASSML%% especially in labor-intensive and salary-challenged jobs %%MDASSML%% where the attitude toward workers is the same as equipment %%MDASSML%% 'break-fix.’

Enlightened managers know better, of course. With our hard-fought experience in manufacturing leaking out the door through retirement %%MDASSML%% and showing little signs of being replaced %%MDASSML%% plant managers need every bright mind and every experienced hand to keep productivity high. Treating any worker as a human cog isn’t just dangerous and inhumane, it’s also stupid.

Lean manufacturing, as we discuss extensively in this issue, is a smart way to put your plant floor on the road to productivity. Quality and safety are the marriage of good equipment and good work processes. Quality and safety are measures we equate to a well-run business. You don’t need a sensor. You just need some sense.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.