Build Value in Now … or Later?

Our enlightening and spirited discussion of value engineering (VE), also known as value analysis, continues. Its ardent defenders have been its practitioners, while the most vocal detractors have been consulting design engineers. For example, Gregory Josephs, P.E., of Philadelphia, was involved with modifications to sedimentation tanks at a large sewage-treatment plant, and VE was mandated by...

01/01/1970


Our enlightening and spirited discussion of value engineering (VE), also known as value analysis, continues. Its ardent defenders have been its practitioners, while the most vocal detractors have been consulting design engineers.

For example, Gregory Josephs, P.E., of Philadelphia, was involved with modifications to sedimentation tanks at a large sewage-treatment plant, and VE was mandated by federal-aid rules—with drawings and specs all but complete.

"The VE report recommended over 100 changes, most of which were impractical," Josephs recalls. "For instance, the VE team suggested modifying tanks with double-vee bottoms to single-vee, thus requiring only a single chain-and-flights per tank—probably never feasible, certainly not with documents 90 percent complete! Many of the changes would have substituted cheaper equipment. To my knowledge, exactly one was acted on—using plastic weir plates instead of metal."

Josephs was most disappointed with the VE firm's tabulation of the cost savings. "Most values were picked out of thin air… [and] only addressed alleged savings, not the costs required to implement [them]. The executive summary stated the total as though all 100-plus recommendations were feasible and desirable.

"That exposure to value engineering left a bad taste in my mouth," Josephs sums up. "The whole concept of major cost savings through VE would seem to suggest that mere design engineers are incompetent."

Similarly, David D. Adams, P.E., president of AMC Engineers, Anchorage, says third-party VE efforts are little more than cost-cutting that often leads to lower first costs—in exchange for higher operations and maintenance (O&M) costs.

"The systemic problem that provides the false justification for VE boils down to engineering fees," Adams believes. "When fees are being squeezed, the last thing an engineer can offer to add is life-cycle cost analysis," or LCCA.

Adams offers an example of how the "quality principle" can help solve the fee/LCCA dilemma. "Two of our public-sector clients have good access to capital funds, but are often shorted on future O&M budgets. They negotiate additional fees at the beginning of projects for engineers to perform LCCA, and they make decisions based on the long-term view," he explains.

The question is, can this approach work for others?

Adams says yes, but it could take some effort. "As a profession, we must resist fee-cutting pressures and educate clients about the benefits of building quality into designs, with LCCA, at the beginning of the design concept."





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Intelligent, efficient PLC programming: Cost-saving programming languages are available now; Automation system upgrades; Help from the cloud; Improving flow control; System integration tips
Smarter machines require smarter systems; Fixing PID, part 3; Process safety; Hardware and software integration; Legalities: Integrated lean project delivery
Choosing controllers: PLCs, PACs, IPCs, DCS? What's best for your application?; Wireless trends; Design, integration; Manufacturing Day; Product Exclusive
PLCs, robots, and the quest for a single controller; how OEE is key to automation solutions.
This article collection contains several articles on improving the use of PID.
Learn how Industry 4.0 adds supply chain efficiency, optimizes pricing, improves quality, and more.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again