Business alert: costly incidents on the rise in manufacturing outsourcing; supplier communication compromised

Product life-cycle management vendor Arena Solutions recently conducted a survey in conjunction with Symphony Consulting concerning the challenges of manufacturing outsourcing, and best practices for addressing them.

09/13/2007


Product life-cycle management vendor Arena Solutions recently conducted a survey in conjunction with Symphony Consulting concerning the challenges of manufacturing outsourcing, and best practices for addressing them. While 85 percent of respondents outsource part or all of their manufacturing operations, nearly two-thirds risk the associated savings because they lack adequate control and processes. These manufacturers still use manual, time-consuming processes such as phone calls, faxes, and emails with spreadsheets. The high occurrence of errors that often result from these methods can lead to hard-dollar costs that eat up the very savings companies are trying to achieve by outsourcing manufacturing in the first place. In fact,
"While outsourcing offers significant financial merits and enables companies to focus on their core strengths, it is not free of challenges," said Bijan Dastmalchi, cofounder and senior consultant for Symphony. "Outsourcing manufacturing without the proper infrastructure and control is a recipe for failure."
The study found a majority of companies that outsourced manufacturing faced a number of significant challenges when working with their contact manufacturers (CM), including coordinating new product introductions, managing and communicating product changes, and communicating information across organizational and geographic boundaries. Perception among these manufacturers is that more effective collaboration with their CMs is critically important and will address these problems. For example, nearly eight out of 10 believe closer involvement and tighter control and processes with their CMs would reduce new product delays.
"Shepherding a product from design through manufacturing is difficult, but introducing outsourcing into the process pushes it to a significantly higher level of complexity. Despite the cost savings associated with outsourcing, the management task becomes even more difficult and carries greater risk," said Dastmalchi. "For manufacturers who are using manual, linear, error-prone, and complicated processes for managing their product record, I recommend they think strategically about the kind of infrastructure they need for support in managing the challenges that come with outsourcing, such as new product introduction, compliance, and change management, for example."
Only 32 percent of respondents currently use a product lifecycle management (PLM) system as a shared "information infrastructure" to manage product information and share it with their CMs. These companies that have a PLM system report experiencing fewer outsourcing problems compared to companies that rely on manual processes for communication regarding new product introduction, change order management and environmental compliance management issues. Three out of four of the respondents who currently use manual processes recognize improvements are needed, and are taking steps to improve their systems.
The research showed even greater advantages came from using on-demand PLM software (also known as software as a service or SaaS) versus traditional client/server systems. On-demand PLM software requires no special hardware or IT staff, is easier to deploy than client/server software and is accessible from anywhere in the world through an ordinary web browser and Internet connection. Specifically, respondents who use on-demand Arena PLM report 40 percent fewer hard-dollar incidents related to excess inventory and unplanned rework. Leading to these results is the fact that Arena PLM users who responded to the survey report significantly fewer outsourcing problems than those using traditional client/server PLM, including:
—32 percent fewer problems with new product introduction;
—29 percent fewer problems with environmental regulatory compliance; and
—26 percent fewer problems with product change management.

"With manufacturing dispersed around the globe, companies need a common infrastructure for sharing product information with their CMs to reduce hard-dollar incidents that can result from common outsourcing issues. Hard-dollar incidents can take their toll on manufacturers, especially those in the mid-market where margins are often tight and reducing time and costs is critical, and consume expected savings from outsourcing," said Michael Topolovac, CEO, Arena Solutions. "Underscoring the magnitude of the risk is the common belief that the cost of product changes increases ten-fold each time errors move into the next development cycle, from design through manufacturing. Having a PLM system—particularly one that is easy to use and deploy—that helps manufacturers reduce the incidents of late-stage changes is crucial."
The results of the study shed light on a very important trend in manufacturing and offer insight to what steps manufacturers must take to be successful with their outsourcing. More information can be found at www.arenasolutions.com/newsandevents/events/index.html .





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.