Calibrating a wireless sensor in the shop

Direct connection of the calibrator, temperature block, and device management platform simplifies the process and records results automatically. Video: Beamex’s Ned Espy demonstrates the process.


Flash is required!

Calibrating a wireless HART transmitter using a Beamex MC6 Advanced Field Calibrator and Communicator, Field Temperature Block, and probe.

Ned Espy, technical director with Beamex, demonstrates an automated, documented loop calibration of a wireless HART transmitter that has been removed from service using the company’s MC6 Advanced Field Calibrator and Communicator, Field Temperature Block, and probe at the Emerson Global Users Exchange 2013.

This automatically documented test is fully supported by Calibration Excellence, a best-in-class software solution for managing calibrations which includes Beamex’s CMX calibration software, Emerson’s AMS Device Manager and the AMS Suite Calibration Connector – which provides a communication link between AMS Device Manager and CMX.

Beamex and ISA have now entered into a partnership naming Beamex as ISA’s Strategic Partner for Calibration. Under the agreement, the two groups will work together to provide ISA members and customers with access to Beamex’s calibration resources, including publications, case studies, seminars, and advice.

Jonas , , 11/26/13 01:15 AM:

What is indirectly demonstrated (and maybe the presenter doesn't even realize) is one of the most important characteristics of the WirelessHART technology: that all WirelessHART devices have a wired HART maintenance/console port/terminal where you can connect a documenting calibrator like this, or a handheld field communicator, or a laptop interface. That is, all the tools most plants already have today can also be used with WirelessHART devices. This means WirelessHART devices are very easy to use. The same procedures apply, so minimal learning. Imagine if any other wireless protocol had been used, then this calibrator or the plant’s handheld etc. could not be used, and instead such a plant would have to rely on new and unfamiliar tools with proprietary interfaces. That would be a much steeper learning curve.

The ability to use the same documenting calibrator, same handheld field communicator, and same laptop software for WirelessHART as you do for your 4-20 mA, Foundation fieldbus, and PROFIBUS devices is very powerful. It just makes the work for the run & maintain organization so much easier. The key to interoperability with multiple protocols mentioned in the video is EDDL ( same tools, same procedures; easy.

Plants can use FOUNDATION fieldbus for control, 4-20 mA for safety as their primary layer of automation for measurements “on the P&ID” for the control and safety systems, and WirelessHART for pervasive sensing as a second layer of automation “beyond the P&ID” for data beyond the control room. All the devices including PROFIBUS for motor controls manage from the same single intelligent device management (IDM) software part of the asset management system. Learn more about pervasive sensing beyond the P&ID here:

The 8-input temperature transmitter shown can provide dramatic savings on a new project in temperature profile applications such as profiles in a reactor, column, boiler tubes, or gas turbine etc. For instance, for fieldbus you can get a transmitter accepting 8 inputs, and you can put 16 of those on the same bus, meaning 128 measurements on a single pair of wires (communication and power). Similarly there are wireless transmitters accepting 4 inputs and you can have 100 of those in a wireless networking, meaning 400 measurements on a single gateway. In most temperature monitoring applications, an update period of 4-16 seconds is acceptable. For a temperature control loop, a single or dual input fieldbus transmitter is much faster achieving. That is, each such transmitter eliminating 8 (or 4) conventional transmitters, 8 (or 4) pairs of wires, and 8 (or 4) AI channels on the system. The cost savings are dramatic. Learn more about fieldbus here:

Learn more about calibration of smart transmitters here:
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Choosing controllers: PLCs, PACs, IPCs, DCS? What's best for your application?; Wireless trends; Design, integration; Manufacturing Day; Product Exclusive
Variable speed drives: Smooth, efficient, electrically quite motion control; Process control upgrades; Mobile intelligence; Product finalists: Vote now; Product Exclusives
Machine design tips: Pneumatic or electric; Software upgrades; Ethernet advantages; Additive manufacturing; Engineering Leaders; Product exclusives: PLC, HMI, IO
This article collection contains the 5 most referenced articles on improving the use of PID.
Learn how Industry 4.0 adds supply chain efficiency, optimizes pricing, improves quality, and more.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security