Coal mine safety

Dear Control Engineering: Aren’t there sensors and other safety devices that could make coal mining less hazardous?

06/22/2010


Dear Control Engineering: Aren’t there sensors and other safety devices that could make coal mining less hazardous?

While 2010 has been a difficult year with 27 mine-related fatalities so far, coal mining is not nearly as hazardous an occupation as it used to be. Prior to 1930, people were practically a consumable item with 2,000 and more fatalities a year. Once we got through WWII, deaths continued a downward trend and by 1950 they were typically below 500, and half that by 1970. Still, mines continue to be dangerous places, and it is difficult to imagine the turmoil people around Montcoal, WV, are experiencing as they await news of who may have perished below the ground.

Methane is frequently trapped in coal seams, and coal dust is highly explosive if airborne, so there are many potentially life-threatening elements. Technologies to measure these problems are common. There are devices to monitor oxygen, carbon dioxide, carbon monoxide, and methane. There are personnel locating devices that use GPS technology to indicate who is where. Some mines tie sensors together using Ethernet, just like any other potentially dangerous process manufacturing environment.

The problem is that such technologies have to be deployed and used properly. One report from the current Upper Big Branch mine rescue says that the mine owner had not put the equipment in the part of the mine that suffered the explosion. This is in spite of a 2006 federal law requiring its use. Miners have been known to bend safety rules to increase production. Regulations require that mines must be evacuated if methane concentrations exceed 1%. (It becomes explosive with concentrations as low as 5% and is especially dangerous around 9 to 10%.) Heavy equipment is supposed to shut down automatically if it reaches 1.5%, but such regulations have been ignored to maintain production levels. Coal dust can be even more explosive, but equipment usually uses water sprays to capture it.

As is often the case with industrial disasters, the main issues don’t relate to a lack of relevant technology as much as the way technology is (or isn’t) used, and how well people are trained. The mine owner in this case, Massey Energy, has been criticized for its record on safety operations. Such was also the case brought against BP in the Texas City refinery explosion in 2005. After the dust settles in West Virginia, there will be much to sift through.

Posted by Ask Control Engineering on April 10, 2010



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.