Combining Corporate-Wide Security

When Minneapolis-based Ceridian, the second largest payroll processor in the United States, implemented its move to a new, company-owned headquarters, company officials prioritized parking ramp security, life safety and corporate-wide access control...

07/01/2001


When Minneapolis-based Ceridian, the second largest payroll processor in the United States, implemented its move to a new, company-owned headquarters, company officials prioritized parking ramp security, life safety and corporate-wide access control. Life safety

Ceridian's new five-story, 260,000-square-foot headquarters utilizes a security and life-safety system that integrates a broad range of security options: subsystems for access control, intrusion detection, fire alarm/life safety and closed-circuit television (CCTV), as well as digital badging, intercom, paging and sound. Individual systems are linked to a common database and conveniently displayed.

Security had to be arranged for internal, entrance and exit doors and for a sizable parking ramp. Security concerns—intruders in the building, minor thefts and assaults—had been escalating in the old headquarters. Consequently, the goal was to design the new building to avoid such problems from the start. CCTV and access

Parking-ramp security arrangements included fixed cameras at entrances and complete pan, tilt and zoom coverage of each corridor of the ramp. Camera coverage was carefully checked to ensure that there were no blind spots, and emergency call boxes were also provided. The CCTV is monitored around the clock.

Building-wide, some 20 doors are provided with access control. Ceridian subscribes to a philosophy of an open work environment to encourage shared work arrangements and collaboration. This is carried out within the new corporate headquarters, where only a few high-vulnerability areas like the local-area network (LAN) room, telecommunications closets and payroll operations are not accessible to every employee.

The building is fully sprinklered and protected with a fire-detection/voice-evacuation system that is integrated with the security system. Application-specific smoke detectors are highly resistant to false alarms—a major consideration for Ceridian's security group, which had formerly been plagued with unwanted alarms. Laser-beam smoke detectors at two levels monitor the building's five-story atrium. To add visual information to the signals and intelligence provided by the detectors, the life-safety system is tied into the CCTV network. Remote locations

A major consideration in the selection of the system was its ability to provide remote networking control, simultaneously monitoring multiple assets through a portal. Access control for all major U.S. sites is managed from corporate headquarters through the integrated security and life-safety system. Well before the move, the headquarters security group began bringing the eight remote locations on-line. The first remote location—Boston—was started up in 1999.

The networking program was one of the most complex tasks in the installation. The Minneapolis LAN was Ethernet-based, two New Jersey sites were token ring and the rest utilize dial-up connections.

As a convenience, the dial-up sites can also be disconnected for stand-alone operation. Local panels store information until their memories are full, then they are reconnected for updating and maintenance.

In the future, the security group would like to monitor all smoke and fire alarms from the central Minneapolis location, just as it presently does with access control. Also on the wish list is substituting digital recording for tape as the technology matures.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.