'Confidence is growing' as technology consumption grows

AMT/AMTDA report shows 82.7% growth in manufacturing technology purchases in 2010; leaders point to 'continuing rebound of the U.S. manufacturing sector'

01/10/2011


November U.S. manufacturing technology consumption totaled $318.18 million, according to AMTDA, the American Machine Tool Distributors’ Association, and AMT - The Association For Manufacturing Technology.  This total, as reported by companies participating in the USMTC program, was down 17.7% from
October but up 81.1% when compared with the total of $175.68 million reported for November 2009.  With a year-to-date total of $2,792.58 million, 2010 is up 82.7% compared with 2009.

These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTC program.

“The November numbers reflect the continuing rebound of the U.S. manufacturing sector,” said Peter Borden, AMTDA President.  “Confidence in 2011 is growing and purchases are being made despite the capacity rates being below the threshold when this normally occurs. Backlogs and deliveries are lengthening while prices are increasing as supply lines struggle to meet the surprising surge in demand. Forecasts suggest things will slow – will this be the case? – stay tuned!”

The United States Manufacturing Technology Consumption (USMTC) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. consumption data of domestic and imported machine tools and related equipment.  Analysis of manufacturing technology consumption provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology consumption is also reported on a regional basis for five geographic breakdowns of the United States.

Northeast Region

Manufacturing technology consumption in the Northeast Region in November stood at $62.68 million, down 35.6% from October’s $97.37 million but up 92.2% when compared with the previous November’s total. With a year-to-date total of $523.86 million, 2010 was up 77.7% when compared with 2009 at the same time.

Southern Region

Southern Region manufacturing technology consumption totaled $35.94 million in November, 9.8% less than October’s $39.83 million but 31.3% more than the November 2009 figure. At $384.77 million, 2010 year-to-date was 79.2% higher than the comparable figure a year earlier.

Midwest Region

Manufacturing technology consumption in the Midwest Region in November stood at $111.07 million,
off 4.7% when compared with October’s $116.50 million but 130.1% higher than the tally for the previous
November.  The year-to-date total of $855.38 million was 95.9% above the comparable figure for 2009.

Central Region

November manufacturing technology consumption in the Central Region totaled $71.30 million, down 22.9% when compared with the $92.42 million total for October but up 48.5% when compared with November a year ago.  The $722.78 million 2010 year-to-date total was 94.4% higher than the total for the same
period the previous year.

Western Region

At $37.19 million, November manufacturing technology consumption in the Western Region was 7.7% less than October’s $40.29 million but up 91.4% when compared with November 2009. The $305.79 million 2010 year-to-date total was 45.5% more than the 2009 total at the same time.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.