Consulting, specifying engineers join in the fight against counterfeits

Counterfeit electrical products can cause serious problems, from property damage to life safety issues.

10/10/2013


The counterfeiting of well-known brands and products is a growing problem, estimated to be 5% to 7% of world trade, or about $600 billion each year. Of those well-known brands and products are consumer safety and critical technology products. In 2012, more than $146 million worth of such products was seized by U.S. Customs and Border Control, a 143% increase from 2011.

Why does this matter to the consulting and specifying engineer? A single counterfeit product can compromise the painstaking and careful coordination of the electrical system. There are potential dire consequences if counterfeit electrical products are installed in the building system they have specified. In the worse cases, counterfeit electrical products can pose a safety threat to the work environments consulting and specifying engineers design.

Counterfeit electrical products often use inferior materials, without regard for any labeled ratings or customer safety. A counterfeit product typically lacks independent certification and testing that is relied upon to ensure safety. The use of counterfeit products can result in malfunctions that cause serious injuries including electrical shock, electrocution, and even death. They are also capable of significant property damage.

By definition, a counterfeit is a product, service, or package for a product that uses, without authorization, the trademark, service mark, or copyright of another intended to deceive prospective customers into believing that the product or service is genuine. This makes detecting the difference between a counterfeit and authentic product difficult, especially as counterfeits become more and more sophisticated.

In this blog, we will discuss ways to avoid and encourage the proper identification of counterfeit electrical products, focusing on a consulting and specifying engineer’s perspective.

Eaton is dedicated to combating electrical counterfeiting to ensure industry professionals are working in safe environments with properly tested and certified authentic electrical products. It is crucial to work together to prevent these unsafe counterfeit products from causing harm to people and property, which is why we are eager to work with consulting and specifying engineers to more clearly define how their roles can help in the fight against counterfeiting.

Share your experiences and thoughts with us via the “comments” section.

As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness, training, and prevention. This involves building awareness of the risks that counterfeit electrical products present to personal safety and the economy with end customers, contractors, inspectors, and electrical resellers.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.