Control Engineering Editorial Team

10/31/2007



ce.gif (1520 bytes)

 

 

Editorial & Business Offices
2000 Clearwater Drive
Oak Brook, IL 60523 USA
(630) 288-8000 • Fax: (630) 288-8580


EDITORIAL STAFF:
David Greenfield
Mark T. Hoske, Editor-in-Chief
Renee Robbins, Senior Editor
Peter Welander, Process Industries Editor
Frances Baetiong, Art Director



Consulting Editors:
Frank Bartos, Consulting Editor
Jeanine Katzel, Consulting Editor
Dick Johnson, Consulting Editor
Vance J. VanDoren, Consulting Editor

International
Bob Gill, Editor, Control Engineering Asia
Kenny Fu, Editor in chief, Control Engineering China
Milan Katrusak, Control Engineering Czech, Editor-in-Chief
Michael Babb, Editor, Control Engineering Europe
Tomasz Golebiowski, Editor-in-Chief, Control Engineering Poland
Inna Lukasik,




David Greenfield
Editorial Director
678/654-1692
david.greenfield@reedbusiness.com
Specific areas of coverage:

  • Global Manufacturing
  • Sustainablity
  • Business Trends & Analysis
  • Software





Mark T. Hoske
Editor-in-Chief
630/288-8570

MHoske@cfemedia.com

SYSTEM INTEGRATION

  • Control Components
  • Discrete Sensors
  • Networking Hardware
  • Safety




Renee Robbins
Senior Editor
630/288-8013
renee.robbins@reedbusiness.com
Specific areas of coverage:
INFORMATION CONTROL

  • HMI/PLC/PAC
  • Design Software
  • PC-Based Control
  • Data Management

MACHINE CONTROL

  • Motors and Drives

  • Motion Control

  • Machine Vision

  • Embedded Control




Peter Welander
Process Industries Editor
630-288-8574

PWelander@cfemedia.com
PROCESS CONTROL

  • Advanced Control
  • Process Instrumentation
  • Process Industries
  • SCADA
  • Networks



Frank J. Bartos
Consulting Editor
braunbart@sbcglobal.net

  • Motors and Drives
  • Motion Control
  • Artificial Intelligence


Jeanine Katzel
Consulting Editor
jkatzel@sbcglobal.net

  • HMIs/Interfaces
  • Process Instrumentation
  • Sensors
  • Industry News


Vance J. VanDoren

Consulting Editor
765/296-7600; fax 765/296-7602
controleng@msn.com

  • Advanced Process Control
  • Loop Tuning/PID
  • System Integrators



Dick Johnson

Consulting Editor
DJtheME2003@aol.com

  • Product Research


Frances Baetiong
Art Director
frances.baetiong@reedbusiness.com

 





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.