Controller for water, wastewater uses

Controller for water and wastewater applications is said to set up easily to handle flow proportional control, residual control, compound loop control with lag times, and de-chlorination with sulfur dioxide. The ¼-DIN 555 unit features NEMA 4X-rated front panel and a large, alphanumeric display readable in all light conditions.

By Staff September 1, 2005

Controller for water and wastewater applications is said to set up easily to handle flow proportional control, residual control, compound loop control with lag times, and de-chlorination with sulfur dioxide. Thealog control system. Alarm trip outputs are available for flow rate, chlorine residual, dosage setting, residual setpoint, rate-of-change, deviation, high/low vacuum, and other conditions. Models are available to provide RS-485 communications for interfacing with digital DCS, PLC, and PC-based SCADAsystems. www.miinet.com Moore Industries