Controllers: Adlink introduces PACwiz with IEC 61131-3 support

Automation applications get support for 256 axes of distributed motion control and up to 2,016 points of distributed I/O.

03/04/2010


Adlink PAC PACWIZAdlink Technology, Inc. has released its first programmable automation controller (PAC) solutions for automation applications using the IEC 61131-3 programming standard. PACwiz provides automation application developers a platform with full compatibility with IEC 61131-3 syntaxes, including the five programmable logic controller (PLC) programming language standards.

With PACwiz, PLC users can easily upgrade to a PAC platform without further training, says Ethan Huang, senior product director. "PACs are now becoming the mainstream solution for automation controllers by providing better performance and flexibility [and] by supporting low-cost PC peripherals such as RAM, CompactFlash, Ethernet, and standard monitors," he explains.

Adlink Technology provides a wide range of embedded computing products and services to the test & measurement, automation & process control, gaming, communications, medical, network security, and transportation industries. PACwiz is derived from Adlink's knowledge of full motion control and high-speed I/O design.

"The platform provides distributed motion control of up to 256 axes and distributed I/O of up to 2,016 points, which are time-deterministic," says Huang. "This not only allows configuration of the entire motion profile and I/O topology based on application requirements, but also allows for flexible wiring configurations which simplify and reduce wiring costs between modules by 20% through the use of standard Ethernet cables."

There are two systems in the PACwiz series : open (PACwiz-MXC) and closed (PACwiz-DPAC). The "open" PACwiz-MXC system is designed using Adlink's fanless expandable platform (via PCI and PCIe slots) and is powered by an Intel Atom N270 1.6 GHz processor. It is designed to operate as an I/O controller integrated with I/O and/or distributed motion modules (HSL and Motionnet modules), while providing the flexibility to add other modules, such as a frame grabber.

The "closed" PACwiz-DPAC embedded system is designed using Adlink's compact and fanless distributed PAC with built-in distributed motion and I/O control solutions using Motionnet and HSL buses. Both PACwiz systems are available now.

See the Control Engineering PLC / PAC channel page for related news and products .

- Edited by Renee Robbins, senior editor
Control Engineering News Desk



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.