CSI's Division 17: The Great Debate

MasterFormat, the Construction Specifications Institute's (CSI) industry standard for categorizing building components has essentially retained the same structure since its inception, organizing major building systems into 16 divisions. However, this may soon change. A number of organizations, including BICSI: A Telecommunications Association and Building Owners and Managers Association I...

09/01/2001


MasterFormat, the Construction Specifications Institute's (CSI) industry standard for categorizing building components has essentially retained the same structure since its inception, organizing major building systems into 16 divisions. However, this may soon change.

A number of organizations, including BICSI: A Telecommunications Association and Building Owners and Managers Association International, have banded together to propose the addition of Division 17, designated for telecommunications technology. But the telecommunications industry has found itself battling electrical contractors on the issue.

If the proposed changes to the 2002 MasterFormat are accepted, the standard would split off telecommunications, local area networks, security, audio/video and other types of low-voltage wiring from Division 16, Electrical, into a new and separate Division 17.

"Bringing these services out from under the umbrella of the electrical contractor and Division 16 is expected to allow more direct input from telecommunications professionals," says Jeffrey Lupinacci, a senior telecommunications designer with Harrisburg, Pa.-based Brinjac Engineering.

However, organizations on the electrical side, including the National Electrical Contractors Association, are fighting Division 17, and instead calling for revision and expansion of Division 16.

NECA's proposed revisions would:

  • Update the current contents of Division 16 to reflect current technology, equipment and systems.

  • Expand Division 16 by adding electrical and electronic systems that presently are located in other MasterFormat divisions.

  • Change the name of Division 16 to "Integrated Building Systems" to reflect the revisions.

"Twenty years ago, it might have made sense to give different kinds of electrical and communications wiring their own, smaller specification divisions," says Brooke Stauffer, NECA's codes and standards director. "Back then, the technologies were fairly distinct—each type of system had its own dedicated control box."

But today, he notes, these different power, communications and control technologies are morphing together. And because this equipment is being put in by the same installers, many operational connections exist between them, and issues like power quality and grounding also cut across these electrical and telecommunications technologies.

"It all should be approached in a common way, not a fragmented one," says Stauffer. "Splitting apart the specs for designing and installing different electrical, communications and control systems just makes no sense at all, here in the year 2001."

Similarly, Thomas E. Glavinich, chair of the architectural engineering department at the University of Kansas and head of the committee that developed NECA's proposal said, "Power, communications and control systems form the central nervous system of modern facilities. And these interrelated systems are increasingly interdependent and inseparable."

After reviewing the proposals, CSI is expected to make a decision on the issue by early 2002.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.