Customized wing motor for motor mounting

The swing servo is designed as a direct drive for motor mounting while also being applicable for rollers. Wittenstein's swing servo is also known as the wing motor.

01/06/2012


The swing servo is designed as a direct drive for motor mounting while also being applicable for rollers. Courtesy: WittensteinWittenstein has created the swing servo, also known as the wing motor because of its appearance. The wing motor was created as a customized solution for motor mounting, with this direct drive also being applicable for rollers by fully integrating the motor into the current layout without extending the roll periphery.

The hollow-shaft direct drive wing motor has two swinging stator halves that feature a mounting concept for unique integration and operating scenarios where axial installation and removal in or from a machine are not possible. The split stator contains two parallel, three phase systems which allow for the stator to be joined together in a controlled way. Each stator half contains a water-cooling pipe system made from stainless steel. It prevents damage to the drive due to intense heat stemming from the roll. It can be retrofitted or dismantled at any time for maintenance, and is designed to withstand the harshest of operating environments.

This motor operates the same way as a classic, one-piece direct drive. The wing motor has a very high efficiency and is very low on energy.

www.wittenstein-us.com

Wittenstein

- Edited by Chris Vavra, Control Engineering, www.controleng.com

controleng.com/motors



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.