Dalkin McQuay meets DOE's rooftop unit challenge

Dalkin McQuay, competing with four other manufacturers, was the first to complete the DOE's challenge, which is designed to help save energy by as much as 50% in buildings.

06/13/2012


The Dept. of Energy has announced Daikin McQuay's Rebel rooftop unit system is the first to meet DOE's Rooftop Unit (RTU) Challenge. Five manufacturers—Daikin McQuay, Carrier, Lennox, 7AC Technologies, and Rheem—are participating in this challenge to commercialize highly efficient commercial air conditioners that satisfy a DOE-issued specification for energy savings and performance. When built to meet the specification, these units are expected to reduce energy use by as much as 50%, relative to units built to current standards. Nationwide, if all 10- to 20-ton RTUs met the specification, businesses would save more than $1 billion each year in energy costs. The five companies have until April 1, 2013, to submit a product for independent evaluation according to the specification.

The Energy Department is evaluating potential demonstration sites for high-performing products that meet the RTU Challenge and is also developing analytical tools that enable businesses to more accurately estimate the energy and cost savings of using high-performance RTUs in their facilities. The specification for the RTU Challenge, aimed at spurring the market introduction of cost-effective, high-performance commercial RTU air conditioners, was developed by DOE technical experts and informed by industry partners.

Learn more about the RTU Challenge here.

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.