Data center products a key factor in ABB purchase

An IMS Research analyst sees advantages after Thomas and Betts acquisition by ABB.

02/10/2012


IMS ResearchABB’s proposed acquisition of Thomas and Betts Corp. will help continue its expansion into the data center power and cooling industry, a market worth more than $15 billion according to the analyst firm IMS Research. The announcement comes on the heels of ABB’s tie-up with Newave S.A., a European provider of uninterruptible power supplies (UPS).

Data center products are a small, but important, portion of Thomas and Betts’ total electrical business. Jason dePreaux, a research manager for IMS Research explains, “Thomas and Betts owns multiple brands that play in the UPS, power distribution, and data center service areas. These offerings will extend ABB’s reach further into data centers, a market of considerable importance for other heavyweights like Schneider, Emerson, Eaton, and GE.”  

The deal values Thomas and Betts at nearly 10 times its 2011 earnings. Other high profile acquisitions in the area have assigned even higher worth to companies. Emerson outbid ABB for Chloride Group in 2011, when it paid $1.5 billion; over 20 times Chloride’s earnings.

dePreaux believes acquisitions like this are common to this industry because of its growth potential and the difficulty for new companies to break into this market. “While the amount of data created and shared worldwide is expanding at a break-neck pace, the evolution of power and cooling infrastructure to support this ‘digital universe’ is more measured. Data center facility managers tend to be conservative and risk-adverse; brand recognition is critical.

Also, local supplier relationships are important owing to the levels of customization required. This creates a significant barrier for new entrants to the power and cooling market and makes acquisitions the preferred route to get into the game. The data-center industry has been completely re-shaped by acquisitions over the past 5-10 years, which have yet show any signs of slowing down, says dePreaux.”

According to dePreaux, “ABB buying T+B was not primarily motivated by the data center aspect; but it must have sweetened the deal.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.