Data center temperature specs change

Walking into an ice-cold data center is slowly becoming a thing of the past, with the days of 68 F computing facilities receding further into history.

02/24/2011


ASHRAE Data Center will soon release the third edition of its Thermal Guidelines specifications, which since 2004 has created the de facto global standard for allowable temperatures within data centers, as well as how to measure those temperatures. 

The second edition of the standard set as the optimal temperature 80.6 F for data center operations. The third edition is expected to further raise that thermostat, although ASHRAE has not yet announced what the new recommended temperature will be.

The standard is created by Technical Committee 9.9, for Mission Critical Facilities. The committee first made waves in the IT industry when it published the book on data center heating and cooling in 2004; prior to that point, individual manufacturers set their own acceptable temperature ranges.

Raising the thermostat in data centers allows companies to cut tens if not hundreds of thousands of dollars off their energy costs every year, and reduces the carbon footprint of the data center at the same time. The most widely quoted estimate is that data centers contribute about 2% of the world's greenhouse gas emissions, although that figure is now several years old and likely underestimates the rapid rise in demand for IT around the world.

ASHRAE's TC 9.9 consists of engineers from IT manufacturing companies, and all of those firms are already working on addressing energy use in the data center. In an article looking at the new standards, Data Center Knowledge's John Rath writes:

But some in the data center industry say ASHRAE will simply be acknowledging advances that are already taking place in some of the largest working data centers. "Most companies in the cloud business are already procuring servers that operate well outside of the ASHRAE specs to allow for aggressive economization to drive much greater efficiencies then what is achievable using the ASHRAE specs," said Christian Belady, the General Manager of Data Center Research at Microsoft Global Foundation Services "My guess is that they realize now that they are no longer driving the industry environmentals, and are now going to broaden to what the cloud providers have already made as the de facto standard."

Belady was among those who encouraged ASHRAE to adopt a more aggressive revision of data center operating temperatures. "At the time I was arguing that (ASHRAE) should be leading the industry and drive vendors to broaden operating ranges well beyond what they ultimately published in 2009 so that the industry can aggressively adopt economization," Belady said, adding that ASHRAE "elected to be conservative."

More details about the new standard are available from ASHRAE.

- Edited by Gust Gianos, Consulting-Specifying Engineer, www.csemag.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.