Defending your safety system

Some of the things the industry learned from Stuxnet were modern industrial control systems/SCADA systems are highly complex and interconnected

07/08/2011


In this era of living with sophisticated attacks like Stuxnet, the main thing manufacturers have to do to ensure their systems remain protected is to look at the vital area that will keep the system up and running.

“You need to secure that last line of defense,” said Eric Byres, chief technology officer at Byres Security, during his talk entitled “How Stuxnet Spreads, a study of infection paths in best practice systems” at the Honeywell User Group conference in Phoenix, AZ . “First and foremost that is the safety system.”

 

Stuxnet was one nasty worm, Byres said. The hysteria caused by the worm showed users were purely reacting and not really thinking about how they can build a solid defense that protects the control system.

The big news when the world first became aware of Stuxnet was people believed the worm entered control systems via a USB key. While that may have happened, it doesn’t seem right that users would ban the use of USB drives. They do serve a quality purpose.

The worm did infect some 100,000 computers and infected at least 22 manufacturing sites, which Byres actually believes was more around the 50 number.

One of the shocking thoughts about Stuxnet was the worm was able to penetrate and damage a nuclear site, which has some of the toughest security in any industry. What happens, Byres asked, when another worm comes around and takes over a less secure environment?

The odd part of the entire attack was Siemens does have a solid layered security architecture in the systems targeted for attack.

As mentioned the attack could have happened on a USB stick, however it could also have come as a result of infected project files, transmitted in an email, an infected laptop among other possibilities.

“If someone wants to put a virus on your site, they will be able to,” Byres said. “It depends on what you do with that afterward is what is important. There was so many ways it could spread.”

Some of the things the industry learned from Stuxnet was modern industrial control systems or SCADA systems are highly complex and interconnected; there are multiple pathways; you have to assume an air gap is unrealistic; focusing security on specific obvious pathways is not a good idea, and users have to complete a simple overall holistic view of the system, Byres said.

The thing is about the attack is the world of attackers have not found a new industry and area that is ripe for attack. “Security experts” can go into systems and find their vulnerabilities and Byres said they are selling them on the Internet for up to $2500.

There were quite a few scary aspects to the worm, but one that Byres said was frightening was Payload C. That was code that never loaded, but Byres believes the creators earmarked that payload for the safety system.

If it went after a safety system, you take on the last line of defense and that could mean the end of the plant and the surrounding area.

“If you combine safety and the control system you are doing the attacker a favor,” Byres said. You have to be able to separate the systems somehow.

Things are not all glum, if users learned lessons from this attack they will be ready for the next one, because there will be a next one, Byres said.

“We live in this perfect world where we can communicate all over the place; we just forgot to manage it.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.