Designing office space: HVAC systems

Office building clients demand sustainability, flexibility, and cost conservation in both new and existing buildings.

10/22/2012


Michael F. Cooper, PE, LEED AP, is a Managing Principal at Harley Ellis Devereaux in Southfield, Mich. Courtesy: Harvey Ellis DevereauxKurt Karnatz, PE, CEM, LEED AP, HBDP, HFDP, is the President of Environmental Systems Design Inc. (ESD) in Chicago. Courtesy: ESDKent W. Peterson, PE, FASHRAE, LEED AP BD+C, BEAP is the Vice President/Chief Engineer of P2S Engineering Inc. in Long Beach, Calif. Courtesy: P2S Engineering

Respondents

Michael F. Cooper, PE, LEED AP, Managing Principal, Harley Ellis Devereaux, Southfield, Mich.

Kurt Karnatz, PE, CEM, LEED AP, HBDP, HFDP, President, Environmental Systems Design Inc., Chicago

Kent W. Peterson, PE, FASHRAE, LEED AP BD+C, BEAP, Vice President/Chief Engineer, P2S Engineering Inc., Long Beach, Calif.


 

CSE: What unique requirements do office building HVAC systems have that you wouldn’t encounter on other structures? 

Peterson: One unique requirement of an office building is the flexibility requirement of the building HVAC system to be reconfigured four or five times over the life of the system. 

Karnatz: The need to support multiple and diverse occupancy needs is the most common difference between other types of buildings. 

Cooper: Office building systems have more diversity in occupancy schedules, required ventilation rates, and functionality. Available equipment space is consistently being challenged to yield higher net to gross square footage. Engineered systems want to be high efficiency, but also with reasonable initial cost. Finally, office buildings are driving simplicity of design. Limited building management resources are encouraging the design community to look at sophisticated systems to meet the functional needs, which are easy to monitor and control. 

CSE: How can automated features and remote system control benefit office building clients? 

Karnatz: Remote monitoring is certainly becoming a very important part of lean building operations and management and will continue to grow. Remote oversight of building system operation provides an opportunity to continuously monitor and respond to load and system changes. It can provide predictive and preemptive information to better respond to the operational and maintenance needs of a system.

Cooper: When building management resources are limited, automation and remote control are keys to making these facilities run. Through Web-based management systems, building occupants can provide input on system performance and, likewise building management who may be responsible for multiple facilities can respond immediately to system notifications and tenant requests. The result is improved responsiveness and a more satisfied tenant community. 

Peterson: Office buildings experience a wide range of occupant diversity throughout the day. Today’s HVAC and lighting controls have the capability of reducing lighting levels when daylight is available or turning off lights when rooms are not occupied. This can result in 50% less lighting energy on an annual basis. 

CSE: What is the most important indoor air quality (IAQ) issue you typically address in these projects, and how do you address it? 

Cooper: Ventilation rates, with varying occupancy and space function, is one of the key issues we see on our projects. In high-density spaces requiring large amounts of ventilation air, dedicated outside air units used in conjunction with energy recovery wheels and demand-controlled ventilation help offset energy consumption. Underfloor displacement air delivery systems are an effective way to get just the right amount of ventilation air where and when you need it. Understanding how fresh air is introduced into the building and managing the quality of the outdoor air through appropriate filtration systems is essential. MERV-13 or better filters are typically utilized for this purpose, with positive results.

Peterson: The most important IAQ issue is to provide the proper amount of ventilation air throughout the range of operation of the building. We always provide airflow measurement of the outside air with demand-controlled ventilation in densely occupied spaces to optimize IAQ and energy efficiency for the building. 

Karnatz: Occupant comfort is enhanced in environments that feel vibrant and fresh. Today’s systems that support higher air change rates and lower thermal asymmetry are able to deliver consistent indoor air quality, thermal comfort, and occupant satisfaction.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.