Direct part identification

How can plant engineers ensure that a part is easily identified by machine vision systems? Justin Testa, senior vice president of ID Products for Cognex Corp., suggests these considerations:

12/01/2006


How can plant engineers ensure that a part is easily identified by machine vision systems? Justin Testa, senior vice president of ID Products for Cognex Corp., suggests these considerations:

  • Code selection %%MDASSML%% The ANSI code standard is the most widely supported for DPMI applications involving metal, glass, ceramic or plastic materials. Data Matrix offers a number of advantages for DPMI applications, including small size, high data encoding capacity and error correction that allows a code to be successfully read even though as much as 60% of the code may be damaged.

  • Available space %%MDASSML%% Limited space may require the Data Matrix code be used as a 'license plate’ to simply identify the part, reducing the amount of data encoded. In this case, a centralized database containing manufacturing and historical data on the device is updated as it is identified during manufacturing and supply chain processes. When space isn’t an issue, users may encode much more information about the part, creating a 'portable database.’

  • Marking processes %%MDASSML%% The primary methods for producing machine-readable symbols for DPM ID include: dot peening, laser marking, electro-chemical etching and ink-jet printing. Your choice depends on part life expectancy, material composition, environmental wear and tear and production volume. Other considerations include: surface texture, amount of data to be encoded, and the available space and location of the mark.

  • Mark placement %%MDASSML%% The location should be clearly visible throughout the manufacturing process; it’s best to mark on a flat site. Choose a location where the mark is in a prominent position easily viewed by the reader. Avoid locations where a surrounding surface relief could potentially affect the illumination of the code by the reader’s lighting source. Provide a 'clear zone’ around the mark where no features, part edges, surface texture or other interferences come into contact with the code. If a mark must be placed on a cylindrical part, take care in selecting the size of the code. Curved surfaces can create distortions to the code and adversely affect illumination.

  • Readability %%MDASSML%% Features that comprise the Data Matrix symbol are the quiet zone, the finder pattern, the clocking pattern and the data region. Each individual element is referred to as a module. Robust and reliable code reading requires a pattern with individual modules consistent in shape and size with each other, and distinctively different in shape and size from other features on the part’s surface.

  • Verification %%MDASSML%% A verification system can immediately detect a mark-process problem, which could be due to poor part fixturing; damage to the machine, such as a broken tip on a dot peen machine; or incorrect settings during part changeover. Additionally, a code verification system can also provide a process feedback on the marking process that can be used in preventive maintenance. For example, the verifier can monitor tip wear on a dot peen machine by monitoring dot size and flag the operator on the floor when a pin should be changed.


No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.