Does "Performance Level" Really Replace "Category" For Machine Safety In The U.S.?

Over the next ten years picture a safety circuit with six safety certified components and four are certified to Performance Level (PLx) and the other two are certified to Cat.x! Is the outcome clear?

02/28/2011


Over the next ten years picture a safety circuit with six safety certified components and four are certified to Performance Level (PLx) and the other two are certified to Cat.x! Is the outcome clear?

True, the European Machinery Directive has ruled that EN 954-1; 1996 will be fully replaced in December, 2011 by EN/ISO 13849-1; 2008. Therefore, the Category system is being replaced by the Performance Level system of hazard determination and mitigation. Ah, but you say – Categories are still covered in EN/ISO 13849-1; 2008 as a part of the PL analysis so are Categories really a thing of the past here in the U.S.?

First, the U.S. never adopted EN 954-1; 1996 as a normative/required compliance standard. In fact, ANSI’s Accredited Standards Committee has ruled that European standards will not be normatively referenced as a required compliance standard in the U.S.  Therefore, whether it’s an active standard or not in Europe is superfluous to the question. In reality, only pieces of EN 954-1; 1996 were written into U.S. standards, such as Categories. With that said, Categories are now a part of U.S. standards, are they not?

Secondly, I’m told by many Europeans that EN/ISO 13849-1; 2008 (as a part of the Machinery Directive) is primarily focused at the machinery manufacturer for designing and manufacturing machines. Yet in the U.S., OSHA is primarily focused at the end users in industry and our consensus standards reinforce OSHA but are also applied to the OEM and engineering firms building and retrofitting machines for end users. Do we have a focus discrepancy between ourselves and our European colleagues?

Thirdly, global safety component and automation manufacturers/suppliers are already transitioning their product safety certifications from SIL per IEC 61508 and Cat per EN 954 to SIL per IEC 61508 and PL per EN/ISO 13849-1. In my opinion, this transition in certifications will aggravate the situation in the U.S. because there isn’t a mandate to move from Cat to PL. So,  over the next ten years picture a safety circuit with six safety certified components and four are certified to Performance Level (PLx) and the other two are certified to Cat.x!

Has the hazard been fully mitigated to the intended and acceptable level?

Submit your ideas, experiences, and challenges on this subject in the comments section below.  Click on the following text if you don't see a comments box, then scroll down: Does “Performance Level” Really Replace “Category” For Machine Safety In The U.S.?

Related articles:

Trouble Implementing ISO 13849-1; 2006 per the European Machinery Directive

 

EN 954-1: 1996 - Five Years Of Cessation

EN ISO 13849-1; 2006 - Are We Ready? 

It's Official - EN 954-1:1996 Is Extended By The EU

 

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Sensor-to-cloud interoperability; PID and digital control efficiency; Alarm management system design; Automotive industry advances
Make Big Data and Industrial Internet of Things work for you, 2017 Engineers' Choice Finalists, Avoid control design pitfalls, Managing IIoT processes
Engineering Leaders Under 40; System integration improving packaging operation; Process sensing; PID velocity; Cybersecurity and functional safety
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
click me