Don't take duplication of your brilliance for granted

No question about it. Engineering Project Supervisor Fred Bailik's savvy was second-to-none in the plant engineering department. And that was exactly the problem.

01/01/1998


No question about it. Engineering Project Supervisor Fred Bailik's savvy was second-to-none in the plant engineering department. And that was exactly the problem.

Chief Engineer Milton Fore brought it to Plant Engineer Henry Lowe's attention one day. The evidence was summed up in an Employee Turnover Report distributed by Personnel.

"Take a look at this, Henry," Fore suggested.

The report listed employee resignations and terminations over a 3-yr period, broken down by department, section, and supervisor.

Lowe frowned. He gazed up at Fore. "Bailik?"

Fore nodded. What disturbed the Chief was clear. The number of quits of good people in Bailik's group were at least double those from any other group in the engineering department.

"What do you think?" Fore asked.

"This can't be ignored. Thanks for bringing it to my attention."

The situation called for a bit of investigation, Lowe decided. He selected five of the qualified professionals who had resigned from Bailik's group and picked up the telephone. By the second call, he had an idea of what Bailik's problem might be. By the fifth, he was convinced.

Question: Can you make a guess regarding Lowe's subsequent action?

Lowe's resolution: Lowe summoned Bailik to his office, offered him coffee, and made the visit as casual as possible.

"What's up?" Bailik asked.

"Small problem, which I think you can easily solve."

He showed Bailik the Turnover Report. It was the project leader's turn to frown. "What do you have in mind?"

Lowe smiled. "Nothing drastic. I think the excessive quits you've been experiencing might be nothing more than a case of a bright executive being too smart for his own good."

He told him about the phone calls he had made.

"The response followed a similar line. Dissatisfaction attributed to what I might categorize as communications gaps. First, I know how busy you are. Second, busy people often lose patience with things that take time. Third, bright people sometimes take it for granted that associates possess the same knowledge and understanding they do. Crediting a subordinate with similar savvy and smarts may be a compliment, but it can also be frustrating. In my opinion, it might make sense for you to slow down a bit in training people, giving assignments, and getting feedback to make sure the other guy is on the same wavelength."

Bailik's high brow was furrowed.

Lowe grinned. "It's not all that serious, Fred. But please give it some thought."





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.