Drive modules handle 1.5 to 600 hp at 480 V ac: ABB

ACS850 drive module from ABB is designed for industrial machinery applications such as converting, extruders, mixers, and web handling in the 1.5 to 600 hp at 480 V ac power range. Module features on-board safe-torque-off, removable memory block, an intelligent user interface with a series of assistant wizards, and modular hardware and software.

01/27/2010


ABB ACS850 drive module is UL listed up to 600 hp.

ABB ACS850 drive module is UL listed up to 600 hp.

ACS850 drive module from ABB is designed for industrial machinery applications such as converting, extruders, mixers, and web handling in the 1.5 to 600 hp at 480 V ac power range. Module features on-board safe-torque-off, removable memory block, an intelligent user interface with a series of assistant wizards, and modular hardware and software.

Safety is provided by an integrated safe torque off (STO) feature, which conforms with the requirements of SIL 3 / IEC 61508, Cat 4/EN 954-1, EN ISO 13849-1:PL e. There also are solutions available for safe stop 1(SS1), safe limited speed (SLS), safe brake control (SBC), safe speed monitor (SSM), and safe direction (SDI). With protection class IP20 (G frame IP00), modules have been optimized for installation into cabinets.

DriveStudio

ABB ACS850 uses the most up-to-date PC tool, ABB's DriveStudio. DriveStudio 1.5 has new, easy-to-use setup wizards that speed up parameter configuration during commissioning and help ensure that all the parameters related to the configuration are addressed, saving time and improving quality.
For more products that can help with machine and motion control, see the Control Engineering Machine Control Channel.

 

The smallest is only 3.7 in. wide , and all can be installed side-by-side. Removable memory block stores firmware plus all user settings and motor data so a drive can be replaced by simply swapping the block into the new drive). Includes an advanced adaptation of ABB's high-performance motor-control platform, Direct Torque Control (DTC), which enhances performance at low speed and with permanent magnet motors.

Features include :
• Improved performance close to zero speed without an encoder;
• Low motor noise mode;
• Higher output frequency, 500 Hz; and
• Improved motor identification at stand still.
The ACS850 also works with the latest generation of ABB high-speed serial interface modules, which support protocols including DeviceNet, Modbus RTU, Profibus, and CANopen. Suport for Ethernet/IP and Modbus-TCP was expected by the end of 2009. Module uses ABB's DriveStudio 1.5; new setup wizards speed up parameter configuration.
www.abb.us/drives





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.