Dual display sensor

The DF-G1 Expert Dual Display Fiber Amplifier by Banner Engineering is designed to detect breaks or changes in assemblies including small part and wire break detection.

03/01/2012


The DF-G1 Expert Dual Display Fiber Amplifier by Banner Engineering is designed to detect breaks or changes in assemblies including small part and wire break detection. Courtesy: Banner EngineeringBanner Engineering's DF-G1 Expert Dual Display Fiber Amplifier features a thermally stable and high performance electronic design with a dual display, two bright, digital readouts and an improved fiber clamp. This configuration allows Banner to effectively serve the diverse range of industries and applications suitable for plastic and glass assemblies, including small part or wire break detection on electronics assembly machines, pill and caplet counting and high-speed detection for registration mark or product leading edge detection.

Along with its intuitive interface, the DF-G1 also maximizes user control, providing full manual manipulation of all operating parameters, including switch point threshold, Light Operate or Dark Operate, various output timing functions, electronic gain level and sensor response speed. Users can also implement one of six Expert Teach and Set methods to ensure optimal gain and threshold selection for each application, particularly in low contrast environments, such as small part or clear object detection.

The DF-G1 is powered by a high-performance 32-bit microprocessor with a 12-bit analog-to-digital converter, and provides versatile response speeds of 200 µs to meet high-speed requirements and 500 µs for standard speed. Additionally, the amplifier is capable of long range (2 ms) and extra-long range (5 ms) detection, allowing operators to optimize the sensing range for long-distance applications, such as part in place verification.

Another key benefit of the new DF-G1 is its thermally stable electronics, which minimize warm-up drift and enables multiple amplifiers to be mounted side-by-side, with no reduction in the ambient temperature limit. Further, inherent thermal stability also provides cost-saving advantages by reducing machine start-up time and eliminating production delays due to ambient temperature changes. For additional flexibility, an intricate cross-talk avoidance algorithm allows two fiber optic assemblies to be mounted in close proximity, sensing different features of the same target.

Banner Engineering offers a broad array of robust SteelSkin, high-flex plastic and glass fiber optic assemblies for mechanically challenging or high-temperature installation—allowing the DF-G1 to be constructed for optimal application suitability. The sleek 10 mm wide housing mounts to 35 mm DIN rail, maximizing the number of sensing points available in the cabinet. The DF-G1's red LED sensing beam makes alignment effortless, and the lever action fiber clamp provides stable, reliable and trouble-free fiber clamping.

The bright dual displays are easy to read, with an ECO (economy) display mode available to reduce amplifier power consumption by as much as 25 percent.

Banner Engineering

www.bannerengineering.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

controleng.com/sensors has more information about industrial-grade sensors.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.