EC: DX99...D Single-Chamber Instrinsically-Safe FlexPower Nodes

Network Integration - wireless - Banner Engineering - DX99...D Single-Chamber. Instrinsically-Safe FlexPower Nodes -The DX99...D Single-chamber Intrinsically-Safe FlexPower Node is a battery-powered, easy-to-install transceiver designed to wirelessly communicate data in hazardous areas. This is a Control Engineering 2011 Engineers' Choice (EC) nominee.

11/01/2010


DX99 D Single-Chamber Instrinsically-Safe FlexPowera NodesThe DX99...D Single-Chamber Intrinsically-Safe FlexPower Node by Banner Engineering is an innovative way to collect analog, digital and temperature information in hazardous areas. A single-chamber housing makes this recent version of the DX99 battery-powered intrinsically-safe wireless transceiver simpler to install. It also delivers a state-of-the-art combination of wireless communication, battery technology and intrinsically safe electronics within a smaller footprint.   

DX99 uses a liquid lithium battery to produce an intrinsically safe power source for the transceiver and an external third party sensor. When combined with low-power consumption sampling electronics, a standalone unit can operate for up to 10 years on a single battery. Its wireless technology is a highly tuned subsystem designed with industrial process applications in mind, designed to be reliable, be secure and provide diagnostic information about the status of the wireless link. DX99 has also been designed to transmit and receive up to 3 miles (150mw with 2dBi antenna) while consuming very little power. Every DX99 has a built-in site survey mode that allows the installer to quickly and easily determine the quality of the wireless link. These features, combined with its intrinsically safe operation, make the DX99 a superior solution for hazardous areas.   

DX99 transceivers are available in a rugged polycarbonate housing or metal housing; both options are intrinsically safe and rated IP67. Rugged polycarbonate housing models are certified for use in Class I, Division 1, Groups A, B, C, D; Class I, Zone 0, Group IIC; and Group IIC, Zone 0. Metal housing models certified for use in Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III, Division 1; Class I, Zone 0, Group IIC; Group IIC, Zone 0; and Dust, Zone 20.    

www.bannerengineering.com

www.bannerengineering.com/en-US/products/7/Wireless/774/Class-I-Div-1-DX99-FlexPower-Nodes 

Banner Engineering

For more, see www.controleng.com/awards



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.