EC: EZ Programmable Power Supply

Power - Energy, power protection: The EZ Programmable Power supply is an industrial 24 V dc, single phase, NEC Class 2, din-rail switched mode power supply with unique displays for voltage/current readouts and maintenance alarms. This is a Control Engineering 2013 Engineers' Choice finalist.

11/12/2012


: The EZ Programmable Power supply is an industrial 24 Vdc, single phase, NEC Class 2, din-rail switched mode power supply with unique displays for voltage/current readouts and maintenance alarms. This is a Control Engineering 2013 Engineers' Choice finalist.With EZAutomation's Programmable Power Supply, EZPPS, plant maintenance no longer need to bring a volt meter to the control cabinet when a device is not powering up. Furthermore, before an HMI, PLC, ac drive or any other control equipment dies due to no power input, thus causing a manufacturing line to stop, a warning signal can be sent to maintenance to avoid any down time! 

EZAutomation's, EZPPS, are field programmable power supplies that include built-in digital displays that provide, at a glance, additional information without connecting a multi-meter. The NEC Class 2 models add flexibility through easy, field-programmable current-limit using the displays and two buttons. The power supplies, in 30 W, 60 W, and 90 W models, have a 3-digit LED display for output voltage and 2-digit LED display for output current.

The power supplies also have maintenance timer functions, showing expected lifespan based on usage, a function that is particularly valuable to schedule replacement before an outage occurs. (Electrolytic capacitors in a switching power supply have limited life, depending upon current and temperature.) A pre-failure warning alarm can go to a stack light or other device accepting the output signal.

Other attributes include DIN mount compact plastic housing at 3.1 in. x 1.8 in. x 4 in. deep, and plug-in connectors for easy maintenance. Operating temperature is -25 to 60 C, with 95% relative humidity. The units have 24 V dc output with less than 100 mV peak to peak ripple, with 1% load regulation; output voltage adjustable from front plate, +5%, to -10%; and 85-264 V ac universal input voltage.

In addition, the unit is protected against an output short or an overload with automatic recovery.  In summary, EZAutomation's, EZPPS brings a new, simple and intuitive approach to power supplies that can minimize troubleshooting and downtime, while remaining both cost-competitive and made in America.

http://flash.ezautomation.net/new2.htm

http://flash.ezautomation.net/ezpowersupply/ezpower_menu.htm EZAutomation



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.