EC: Fluke 750 Series Documenting Process Calibrators

Hardware – Handheld test, measurement, calibration: The Fluke 750 Series does the work of several tools—sourcing, simulating, and measuring pressure, temperature, and electrical signals—in one rugged, hand-held device. This is a Control Engineering 2012 Engineers’ Choice award winner.

11/17/2011


Fluke 750 Series Documenting Process Calibrators. The Fluke 750 Series does the work of several tools—sourcing, simulating, and measuring pressure, temperature, and electrical signals—in one rugged, hand-held device. This is a Control Engineering 2012 Engineers’ Choice finalist.The Fluke 750 Series Documenting Process Calibrators allow technicians to perform field calibrations and troubleshoot operations with superior speed. Process professionals have long relied on the 743/744 Documenting Process Calibrators for advanced instrument calibration, especially in rugged environments. Operating the 750 Series is so similar to operating the 743/744 that existing users will be able to immediately start using the 750 Series. No training is required to get substantially increased performance from the new models, according to Fluke Corp. These field tools calibrate temperature, pressure, voltage, current, resistance, and frequency and have three operating modes—measure, source, or simultaneous measure/source—enabling technicians to troubleshoot, calibrate, or maintain instrumentation with just one tool.

The 750 Series features an easy-to-follow, menu-driven display that guides users through tasks. Programmable calibration routines enable technicians to create and run automated as-found/as-left procedures to ensure fast, consistent calibrations. The recorded results can then be easily downloaded to a PC via the USB port, eliminating the need for manual transcription.

Improvements over the original model include a brighter graphical display that allows readings to be seen in any light condition. Another improvement is the rechargeable Li-ion battery pack, which provides enough power for an entire shift and can be charged from within the calibrator.

The 754 model is the first field calibrator for HART instruments that is both powerful and easy to use. It offers fast HART communication and requires no external box or secondary tool to perform everyday HART calibration and maintenance. The 754 is easy to update as additional instruments are added and new HART versions are released, and is backed by the service and support of Fluke, a member of the HART Communications Foundation.

www.fluke.com

www.fluke.com/fluke/usen/Process-Calibration-Tools/Multifunction-Calibrators/Fluke-754.htm?PID=72960

Fluke Corp.

Return to the list of the 2012 Engineers' Choice award winners.

View the list of the 2012 Engineers' Choice honorable mentions.

View the complete list of the 2012 Engineers' Choice finalists.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.