Embedded PC series features multi-core processors and extended temperature range

Beckhoff Automation announces new CX2000 embedded PC Series, aims at replacing larger cabinet models.

09/04/2012


Beckhoff Automation announces new CX2000 embedded PC Series, aims at replacing larger cabinet models.Beckhoff Automation has introduced its new CX2000 embedded PC series, leading off with three models, including two that implement powerful multi-core processors. The company says that with this boost in performance, these embedded controllers cover performance areas previously reserved for larger, cabinet-mounted industrial PCs, including advanced multi-axis machinery and powerful graphical user interfaces. 

This new series represents the second generation of the Beckhoff embedded PC family which will build on the success of the first. The new CX2000 devices are equipped with Intel processors from the second generation of the 32-nm series (“Sandy Bridge“). Power-saving Celeron variants are also available, making fanless options possible. Their operating systems benefit from the fast, integrated graphic core as well as fast DDR3 memory. The first three devices in the series include:

• CX2020: Second-generation Intel Celeron @1.4 GHz, single-core
• CX2030: Second-generation Intel Core i7 @1.5 GHz, dual-core, and
• CX2040: Second-generation Intel Core i7 @2.1 GHz, quad-core.

The CX2000 housing concept combines a metallic basic housing with front panels made of a special screening plastic and can handle environments with temperatures ranging from -25 to 60 °C.

The basic CPU module from the new series always has one DVI port, four USB ports, and two independent Ethernet ports. A factory-configurable internal slot referred to as a “magic interface” can optionally perform the functions of a wide range of interfaces. For example, fieldbus master and slave implementations are possible, including EtherCAT (slave), Profinet, EtherNet/IP, Profibus, CANopen and DeviceNet, as well as serial interfaces (RS232/RS422/RS485).

The modularity of the CX2000 devices on the left-hand side of the CPU is based on PCI Express as the bus system and offers a bandwidth of 5 gigatransfers per second (GT/s) per PCIe TX/RX channel. This enables the connection of a variety of interfaces; for example, a maximum of four modules each with two independent 1 Gbit Ethernet ports can be connected. Alternately, up to eight serial interfaces can be connected, which are each implemented in pairs as RS232 or RS422/RS485. The number of possible USB interfaces can also be multiplied: four high-speed (480 MB/s) USB 2.0 interfaces can be connected per module.

The basic concept of the embedded PCs is a convergence of standard PC technology with “DIN rail-friendly” design to form a flexible industrial controller. On the hardware side, the devices from the CX2000 series offer I/O support and a direct connection for Beckhoff bus terminals and EtherCAT terminals. Another newly added feature is automatic recognition of the respective I/O system (EtherCAT terminals or bus terminals) in the CX2000 power supply module, which can simplify customer orders and installation. On the software side, the new CX generation also continues exclusive support of Microsoft operating systems with Windows Embedded Standard 7 or Windows 8, depending upon availability.

www.beckhoffautomation.com

Edited by Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.