Embedded systems: Vita adopts new policy on intellectual property used in standards

01/30/2007


Info control, embedded control, software, controllers

Vita Executive Director Ray Alderman explained the organization's policy at the Bus & Board show in Long Beach, CA.

Long Beach, CA —Vita, the VMEbus Trade Association, and its standard-setting body VSO made some history at the Bus & Board show in Long Beach, CA in January: By a 35-to-2 vote with 12 abstentions, VSO adopted a policy that requires any holder of intellectual property included in a new standard to which it is a party to reveal early in the process any patents (issued and pending) that have an essential bearing on the new standard, along with the maximum fee and royalty schedules. Those fees and royalties cannot then be increased, and must be applied in a non-discriminatory manner.

Failure to disclose patents in a timely way can result in the offending company being required to license the intellectual property for free. Patent law goes to great lengths to define a patent holder's right, explained Vita Executive Director Ray Alderman, but says nothing about responsibilities; these ex parte procedures, he said, define a patent holder's responsibilities.

The new policy is not universal, but will be applied on a per-standard basis. It is the culmination of about 18 months of legal maneuvering and negotiations with the Department of Justice, resulting in a business review letter approving it.

Alderman says there are major companies on both sides of this issue, to the point that one mega-corporation has been quietly lobbying European authorities against adopting similar rules. This is unlikely to succeed, he added, because he has been assured that the new policy is in agreement with existing European regulations, and that there would be no need for the European equivalent of a business review letter.

Alderman threw down the gauntlet to those who might disagree with Vita's action, essentially saying, 'Sue us and you'll have to take on the Department of Justice.'

A review copy of the policy will be sent to ANSI, said Alderman, but the Justice Dept, has previously said that a rejection by ANSI would constitute an antitrust violation. He added that other standards organizations are watching; IEEE, for example, has provisions for voluntary disclosure, but Vita's mandatory requirement is new. 'This is going to turn things upside down,' he says. He adds that there is interest in the new policy in the Federal Trade Commission, and in the U.S. Senate, which may consider using it in drafting a federal transparency law.

Information on the new ex parte policy is available on the Vita Website .

Click here to read more from Control Engineering on this matter.

—Control Engineering Daily News Desk
Submitted by Pete Cleaveland , contributing writer





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.