EN ISO 13849-1; 2006 - US Bridges Needed For Transition - Comment: Integrators, OEMs not ready

09/24/2009


This week the issue of the EU extending EN 954-1; 1996 to 2012 is still the talk of machine safety. Some camps appear to feel comfort in the three additional years of needed time for industry to prepare for the new compliance requirements. I agree with other camps that are expressing a sense of discomfort because we believe the new EN ISO 13849-1; 2006 provides improved safety performance and machine operating efficiencies. Hence, with EN 954-1’s cessation being prolonged to 2012, we feel these needed benefits will be postponed into the future.

Here’s my wake-up call! We’ve already had three years to get ready but industry is lagging behind and I feel that suppliers are not applying enough attention to the transitional “Bridges”. Today, we’re still trying to get medium and small companies to understand the need and process to complete basic risk assessments. Most of the current tools for our segment of industry drive the hazard analysis to derive an objective category for each hazard identified. With this understood, what logical success can folks expect in getting industry to broadly step to the quantitative requirements of EN ISO 13849-1 when most of industry is still in the starting gates? We’re on opposite banks of the river!

Therefore, it’s my opinion that three additional years provide; suppliers, integrators, consultants, and manufacturers additional time to develop these missing bridges. Industry needs to transition from the objective based hazards (like Categories from EN 954-1) to the more difficult mathematically derived hazards (like Performance Levels from EN ISO 13849-1). Only training industry on the new requirements might work for 20% of industry - but what about the other 80%? They’re not ready for good reason!

Wake Up - Our Industry Needs Bridges!

Posted by J.B. Titus on September 24, 2009

COMMENT

October 2, 2009

In response to: EN ISO 13849-1; 2006 - US Bridges Needed For TransitionRoger Brodeur commented:

 

As a safety product manufacturer, I would have to agree that integrators and OEM’s are not ready in the U.S. Other than large OEM’s, my customers are generally not doing risk assessments at all. They are doing safety as they have for the last 12-15 years with the goal of always reaching category 4. They don’t even try to realize the potential savings by going to a lower category because of a fear of lawyers. Also, the end user customers specify that the OEM must do risk assessments, but they also specify category 4 for all safety! Why bother doing an assessment?

We in the supplier world are trying to educate our customers, but it’s a long time off before they will accept the European way of doing assessments and sticking by the results. 13849 will be a major paradigm shift for U.S. companies and I believe it will reduce shipments of automation from the U.S. to Europe.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Integrated mobility; Artificial intelligence; Predictive motion control; Sensors and control system inputs; Asset Management; Cybersecurity
Big Data and IIoT value; Monitoring Big Data; Robotics safety standards and programming; Learning about PID
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me