Engineering firms actively consolidating

State and federal funding levels have impacted the industry in the wake of the recession; many firms being acquired are specialty engineering firms.

09/06/2011


A recent survey of 93 consulting engineering firms across New York state conducted this summer by the American Council of Engineering Companies of New York to identify industry trends and issues indicates that firms are actively acquiring other firms, primarily non-competing specialty engineering firms. More than one-third (36%) of survey respondents report that their firm acquired another firm in the past five years. This trend is expected to continue. More than half (51%) of respondents indicated it is likely or very likely their firm will acquire another firm in the next five years.

Despite the acquisitive mood of the industry, only 17% of respondents view consolidation favorably. More than half of the participants said it forces small and mid-size firms out of the market. One-third of those surveyed say it increases cost competition, a factor that has had a significant impact on business over the past several years according to 73% of respondents. More than half (62%) anticipate that cost competition will continue to impact their business in the next year.

State and federal funding levels are also high on the list of conditions impacting the industry. Nearly two-thirds of those surveyed (62%) said New York State funding levels have had an impact and will continue to affect their business next year, while 37% said federal funding levels have affected their business, and 50.5% anticipate their impact going forward.

The use of alternative project delivery systems, such as design-build and public-private partnerships, is also expected to trend upward over the next five years. Currently, 75% of respondents report that their firms have been involved in design-build projects and 27% have been involved in public-private partnerships. Almost half (48%) of respondents have a positive view of both methods. An additional 29% were neutral on design-build and 39% were neutral on public-private partnerships. Most of those surveyed (75%) foresee the use of alternative delivery methods increasing over the next five years.

In rating industry conditions overall, more engineers describe their business as fair (50.5%), and the same as last year (44%), than any other category of response. Only 7.5% rated their business “not good.” Most of the engineers (61%) who participated in the 2011 survey were at least somewhat optimistic about the outlook for 2012. This is an increase from a similar study conducted in 2009, which indicated a positive outlook among 46% of those surveyed.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.