EPA fracking regulations in play

Fracking rules are now coming into play to combat air pollution from natural-gas drilling, while giving companies until 2015 to meet the most stringent requirements opposed by the energy industry, U.S. Environmental Protection Agency (EPA) officials said.

05/01/2012


ISS Source, Industrial safety and security sourceFracking rules are now coming into play to combat air pollution from natural-gas drilling, while giving companies until 2015 to meet the most stringent requirements opposed by the energy industry, U.S. Environmental Protection Agency (EPA) officials said.

The regulations will primarily affect the estimated 13,000 wells a year drilled using hydraulic fracturing, or fracking, to free underground gas in shale formations. The EPA rejected a bid by the American Petroleum Institute (API) to exempt wells from the requirements altogether.

The president has been clear that he wants to continue to expand production of important domestic resources like natural gas, and today’s standard supports that goal while making sure these fuels are produced without threatening the health of the American people,” said EPA Administrator Lisa Jackson, appointed by President Barack Obama.

An EPA draft of the rule would have put the requirements into effect in about 60 days. The final regulation delays until Jan. 1, 2015, a requirement that drillers capture gases when first tapping a well. Operators must burn off that gas during the phase-in period, the EPA said.

The EPA proposed the rule last year to focus on fracking, in which millions of gallons of chemically treated water ends ups forced underground to break up rock and free gas. The method opened vast new shale gas deposits and helped push gas prices to the lowest level in a decade. Gas for May delivery touched $1.94 per million British thermal units today, the lowest intraday price since January 2002.

The rules force drillers of new wells to capture smog- forming compounds and other substances often released into the air or flared off when they tap a well. The process also results in capturing methane, the primary component of natural gas. Half the new wells already use this technology, according to the EPA.

Devon Energy Corp. has said 90 percent its wells capture the gas and Southwestern Energy Co. says almost all wells in the Marcellus and Fayetteville shale formations collect the gas already.

“Every molecule of gas you let escape out into the air is a molecule of gas you can’t sell,” said Tim Hartley, a spokesman for Oklahoma City-based Devon.

The EPA analysis says that drillers may make $11 million to $19 million a year after paying for the equipment to comply with the rule, because they can sell the gas that otherwise would escape into the air.

Lobbyists for companies including Chesapeake Energy Corp. wanted to delay and scale back the rule while rebutting environmentalists’ claims fracking causes air pollution.

“Overall, EPA has made some important adjustment in the rules that allow” the industry to comply, said Howard Feldman, research director for the American Petroleum Institute.

The group argued to the Obama administration the equipment required to capture the gas as required by the EPA rules wasn’t available in sufficient quantities. In delaying the requirement, EPA echoed that assessment.

The EPA added incentives to prod drillers to use a technology called green completions where gas ends up trapped. Companies that refracture a well and use green completions won’t be subject to state permitting requirements, according to EPA documents.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.