Equipment failure delays plant start-up

Mechanical issues push back start at the Prairie State power plant in Marissa, Ill.

06/05/2012


ISS SourceAn equipment failure will lead to further delays at the Prairie State power plant in Marissa, Ill.

Mechanical delays have caused the start up to push back to the end of this year for the first of two 800 MW coal fired generators, said Coldwater Board of Public Utilities (CBPU) Director Paul Beckhusen, also a member of the American Municipal Power (AMP) board. CBPU partially owns the plant and AMP is supervising construction.

Beckhusen said it is possible the second unit could go online before the first. Now in a regulatory filing, AMP said one of the plant’s large fans suffered damage on March 27, 2012.

“The extent of damage and root cause analysis is under way,” the company reported. Because they don’t know why the fan failed, this latest delay could push the completion of the plant into late 2012. According to the filing this would be about a year later than original completion date of last December.

Because it remains uncertain why the fan failed, the second unit also shut down until officials complete the analysis. The fan is a key element for reducing air emissions which will make this coal plant one of the least polluting in operation.

The main contractor, Bechtel Corp., will need 10 to 12 weeks to obtain the critical parts for the repair. It will also require up to 30 weeks for other unique parts AMP stated in the filing. Repair time would add another six weeks, the report stated.

Estimates show the project is several billion dollars over budget but in AMP’s agreement with Bechtel, the contractor owes damages for each week the plant is late. There is also a cap on budget overruns that AMP must pay.

Coldwater has contracted for 9.8 MW of power from Prairie State which it expects online next summer. It does not need the capacity until the summer of 2015 when long-term power purchase contracts end. By then, its peak demand should increase to 59.4 MW of power.

The only other member of the Michigan South Central Power Agency (MSCPA) to purchase an interest in Prairie States is Marshall which agreed to take 1.99 MW.

While there are Midwest power companies who own interest in the plant, AMP purchased 23% for its members when it took over construction and operations. A number of Illinois municipalities and rural eclectic co-ops also are showing interest in the power.

Funds to pay off the bonds used for construction and operational costs will come from electric rates of those who own an interest or buy the output.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.