Ethernet communication module

DirectLogic DL405 PLC can be inserted into any I/O slot of any local DL405 base—including expansion bases when using the DL450 CPU and –1 bases—to implement master/slave Ethernet communication at 10 or 100 Mbit data rates.

By Control Engineering Staff July 31, 2006

H4-ECOM100 Ethernet communication module for the DirectLogic DL405 PLC can be inserted into any I/O slot of any local DL405 base—including expansion bases when using the DL450 CPU and–1 bases—to implement master/slave Ethernet communication at 10 or 100 Mbit data rates. Module supports Modbus TCP/IP client/server and standard IP and IPX protocols. It allows PLC-to-PLC or PLC-to-Modbus TCP/IP device communications through the use of standard read/write instructions. Useof DirectSoft5 PLC programming software and DL450 PLC simplified communications programming with fill-in-the-blank IBox instructions. Module ships with NetEdit3 software to configure Ecom modules for networking.

www.automationdirect.com

AutomationDirect