Ethernet I/O module becomes thin server

Temecula, Calif.— SNAP Ethernet I/O now interfaces Ethernet to any RS-232 serial device. This two-channel I/O module allows users to place the I/O system close to the data source and multiplex all signals to an Ethernet network. A total of 16 modules of any type--serial, digital, or analog--can be mounted on a single rack.

By Staff November 1, 1999

Temecula, Calif.— SNAP Ethernet I/O now interfaces Ethernet to any RS-232 serial device. This two-channel I/O module allows users to place the I/O system close to the data source and multiplex all signals to an Ethernet network. A total of 16 modules of any type–serial, digital, or analog–can be mounted on a single rack. SNAP-SCM-232 module offers baud rates of 300 to 115,200 bps. Connections are RJ-45 jack on top of the module with included adapter cables to male and female D Shell connectors. Ready-to-Send (RTS) and Clear-To-Send (CTS) support is provided allowing communication with such devices as radios or modems. Each port is individually optically isolated up to 750 V rms. Opto 22