Ethernet stand-alone controller

Mountain View, Calif.— DMC-2100 is a stand-alone motion controller that uses the Ethernet communication protocol. The series is available in 1- through 8-axis formats, which enables control of both step and servo motors on any combination of axes. DMC-2100s feature high-speed, longdistance communications, enabling connectivity to computer hardware devices located on a LAN, such as I/O mo...

By Staff October 1, 1999

Mountain View, Calif.— DMC-2100 is a stand-alone motion controller that uses the Ethernet communication protocol. The series is available in 1- through 8-axis formats, which enables control of both step and servo motors on any combination of axes. DMC-2100s feature high-speed, longdistance communications, enabling connectivity to computer hardware devices located on a LAN, such as I/O modules, HMIs, PCs, PLCs, and vision systems. Users can work over the Internet or a company’s intranet using a common browser and perform diagnostics. Information can be uploaded or downloaded from a remote site. Galil Motion Control