Europe: “The first economy of the low-carbon age”

It’s a new era in the fight against climate change, says European Commission president José Manuel Barroso. The 27 countries of the European Union have proclaimed far-reaching mandates to reduce carbon emissions and boost renewable energy use. He called on the rest of the world to join the EU in “the great project of our generation.

03/01/2008


It’s a new era in the fight against climate change, says European Commission president Jose Manuel Barroso. The 27 countries of the European Union have proclaimed far-reaching mandates to reduce carbon emissions and boost renewable energy use. He called on the rest of the world to join the EU in “the great project of our generation.

“I believe that this will be an important moment for Europe,” he said, adding that he hoped the bloc’s actions will spur change in other parts of the world. “If we want a global agreement, it is absolutely indispensable that Europe leads the way to get others to follow,” he said.

20-20-20 vision

The plan delivers on a decision by European national governments in March 2007 that, in overall averages, they should reduce greenhouse gas emissions by 20% by 2020 from their 1990 levels, and ensure that 20% of energy use comes from renewable sources, such as wind and solar power. In Europe, it’s the “20-20-20 vision.”

In the unlikely event that the international community (read: U.S., China, and India) should agree on the Kyoto targets for emission levels, Europe will raise the bar and commit to 30% greenhouse gas cuts.

The EU can boast it is on track: By 2005 the bloc had cut greenhouse gas by 6% from 1990 levels and was relying on renewable sources for 8.5% of its energy. But that’s not enough, and the percentages, of course, vary widely from country to country. Small countries such as Malta and Luxembourg have practically no renewable energy sources, while in Sweden, almost 40% of energy consumed is renewable, and this nation of 9 million people has a goal to be 100% oil-free by 2020.

Most countries fall well into the middle to lower end: Germany has 5.8% renewable and must go to 18%; Britain had 1.3% renewable in 2005, and is mandated to reach 15% by 2020. France, in particular, will have some negotiating to do. Its highly successful 58 nuclear power plants produce nearly 80% of the electricity, and the country is looking to build more. Its preferred source of energy is low-carbon, but uranium is not considered a renewable source by the EU.

Reaching the targets won’t be cheap and it has the potential to change the way Europeans live and do business. There are two ways automation suppliers will benefit from these changes.

First, renewable energy construction projects call for vast amounts of instrumentation and computer control, because the energy is usually acquired in relatively small amounts across large areas and must be transferred to the electricity grid. Secondly, using energy more efficiently may have a major role in carbon reduction.

Europe wants to lead the rest of the world in energy conservation. Whether or not industrially-produced carbon dioxide has made, or will make an impact on the global environment remains conjecture, but there is one certainty we all have to accept: that the supply of fossil fuels is rapidly diminishing, and won’t last forever. The sooner we shift to alternative energy strategies, the better off we will be.

For more information on European efforts to achieve greater levels of energy efficiency, as well as to gain greater insight into the organizations that are driving innovation in the development of cost and energy saving technologies, visit www.controleng.com/global .





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.