Flexible-distributed controllers

DMC-31x3 series flexible-distributed controllers are designed for machines that require multi-axis controllers operating in a distributed network. Device frees the host computer from the complex task of motion coordination as well as lowering controller cost per axis. Ethernet-based, the DMC-31x3 ensures low-cost, effective communications between various controllers, I/O modules, cameras, and o...

By Staff December 1, 2003

DMC-31×3 series flexible-distributed controllers are designed for machines that require multi-axis controllers operating in a distributed network. Device frees the host computer from the complex task of motion coordination as well as lowering controller cost per axis. Ethernet-based, the DMC-31×3 ensures low-cost, effective communications between various controllers, I/O modules, cameras, and other such devices. The series can be specified for 1 to 8 axes and is not restricted to single-axis motion controllers.

Galil Motion Control , www.galilmc.com