Fossil fuels sector loses steam in the medium- and high-power generator markets

The fossil fuels sector dominates the medium- and high-power generator markets, but the share of new generator sales that utilize fossil fuels may decline, according to research by IHS.

12/19/2013


The fossil fuels sector dominates the medium- and high-power generator markets, accounting for approximately 76 percent of revenues in 2012, according to recent findings by IHS. The share of new generator sales that utilize fossil fuels, however, is forecast to decline as growth in the renewables and nuclear sectors ramps up.

Generators sold into the renewables (excluding wind and solar PV) and nuclear sectors are forecast to experience significant growth through 2017. Power generated by renewable sources is considered carbon neutral, and government legislation in many countries has been enacted to reduce carbon emissions in an attempt to reverse the harmful effects of climate change. Because of this, generators sold into hydro and other renewables such as biomass and solar Concentrated Solar Power (CSP) are seeing rapid growth.

Despite the backlash from the Fukushima nuclear disaster in 2011, and Germany deciding to close down all of its nuclear power plants by 2022, the nuclear industry is projected to see a resurgence through 2017 and beyond. Nuclear power, which is also carbon neutral, will see most of the growth from only a few countries, including China, India, Iran, Russia and South Korea.

Nuclear power is attractive in these countries because of the need for large increases to their base load capacity in order to keep pace with growing demand. Furthermore, these countries have historically relied on coal-fired power plants for electricity generation, especially China and India. Adding nuclear power allows them to reduce carbon emissions, while at the same time, helps to clean up their image as high carbon emitters.

The discrepancy of natural gas prices and delays in project financing are other factors keeping generator sales prospects for the fossil fuels sector subdued. The United States saw a large impact as gas prices fell to historically low levels mainly due to the increase in production from shale gas fracking. This gas boom, however, has yet to spread to Europe and Asia where natural gas prices are three to four times higher. Financing and investments for large power plants have also been more difficult to secure, which has led to delays in equipment purchases.

Published in November 2013, “The World Market for Medium and High Power Generators” outlines how these markets are forecast to perform through 2017 and offers insight into which regions and product categories may experience growth in the future. In this challenging economic climate, it is important for generator suppliers to understand these driving forces.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.