Giant dragonfly, jellyfish make waves

Festo, a manufacturer of pneumatic and electromechanical systems, components and controls for automation, had an attention-grabbing giant dragonfly and jellyfish on display at the Pack Expo in Chicago. See the video to watch the dragonfly in flight!


Flash is required!

Giant dragonflies, 290 million years ago, had a similar wingspan, just over 2 ft (63 cm). This Festo Bionic dragonfly was 90% 3D printed. It weighs about 6.2 oz (175 g) including 8 servo motors, one for flapping and one for direction on each of the four wFesto, a manufacturer of pneumatic and electromechanical systems, components and controls for automation, displayed an attention-grabbing giant dragonfly and jellyfish. The dragonfly uses the Festo BionicOpter design, an ultra-lightweight flying object that can fly in all directions and perform complex in-flight maneuvers. The BionicOpter can move each of its four wings independently, which allows it to mimic the movement and flight of a helicopter, plane, and glider. It can even fly backwards.

3D printed components

This unique way of flying is made possible by the ultra-lightweight construction (some 90% of the dragonfly is 3D printed) and the integration of components such as sensors, actuators, and mechanical components. (See photo caption for more information.) Furthermore, open- and closed-loop control systems are installed in a tiny space and adapted to one another. The flapping frequency, amplitude, and angle of incidence are controlled by software and electronics.

Mechanics of flying

The principles of ultra-lightweight construction are applied throughout the flying object. With a wingspan of just over 2 ft (63 cm) and a body length of 44 cm, the model dragonfly weighs just 6.2 oz (175 g). The wings consist of a carbon-fiber frame with a thin foil covering. Intelligent kinematics corrects any vibrations during flight and ensures flight stability. To stabilize the flying object, data on the position and the twisting of the wings is continuously recorded and evaluated in real time while in flight. 

Into the sea

AquaJelly is the other mechanical creature that was demonstrated in a large water tank in the booth. Instead of flying this jellyfish swims and swarms. It has eight tentacles and housed in the center of its watertight laser-sintered body is an electric motor powered by two lithium-ion batteries.

Festo doesn't offer the remote-controlled dragon from or autonomous robotic jellyfish for sale, but hopes to learn from the engineering used, and apply those technologies to its commercially available products. A gripper demonstrated with a robotic elephant trunk (shown previously) is available for sale, for instance.

- Edited by Eric R. Eissler, associate editor, CFE Media, Control Engineering,


ONLINE extra

See related Festo bionic developments including a kangaroo and bird and other product developments at Pack Expo 2014 in Chicago.

Festo is a CSIA member as of 3/5/2015

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Integrated mobility; Artificial intelligence; Predictive motion control; Sensors and control system inputs; Asset Management; Cybersecurity
Big Data and IIoT value; Monitoring Big Data; Robotics safety standards and programming; Learning about PID
Motor specification guidelines; Understanding multivariable control; Improving a safety instrumented system; 2017 Engineers' Choice Award Winners
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
click me