Hand-held test, pressure calibration system

The Advanced Modular Calibration System from GE Sensing & Inspection Technologies is a hand-held test and calibration system that combines an advanced, multi-function calibrator with world class pressure measurement and generation capability, the company says. Its modular concept allows its discrete components to be used as stand-alone instruments, allowing flexibility in cost of ownership ...

07/01/2008


The Advanced Modular Calibration System from GE Sensing & Inspection Technologies is a hand-held test and calibration system that combines an advanced, multi-function calibrator with world class pressure measurement and generation capability, the company says. Its modular concept allows its discrete components to be used as stand-alone instruments, allowing flexibility in cost of ownership and in functionality.

It uses three basic components to perform duties formerly requiring a wide range of instruments: electrical, frequency, and temperature calibrators.

The compact and robust multi-function unit can measure and source mA, mV, V, Ohms, frequency, and a variety of RTDs and thermocouples, GE says. Pressure measurement is provided by interchangeable pressure modules that attach to the calibrator via a carrier. The calibrator and the pressure modules can also attach to a pressure generation station to form a fully integrated, high-performance pressure calibrator. Three pressure stations are available, enabling the generation of pneumatic pressure from 95% vacuum to 20 bar or up to 100 bar while hydraulic pressure capability is 0 to 1000 bar.

The weatherproof multi-function DPI 620 calibrator is said to be two to three times smaller, and weighs less than a third of its nearest competitor and has one of the largest and brightest displays, according to GE. www.gesensing.com





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.