Hearing loss on factory floor a silent problem, study shows

University of Michigan School of Nursing study finds more awareness, testing and protection needed

07/16/2012


More than half of factory workers who thought they had excellent or good hearing actually suffered hearing loss and didn’t even recognize the problem, a new study shows. The University of Michigan School of Nursing study found significant differences between measured and perceived hearing loss, and suggests health care providers need better methods of testing and protecting hearing among factory workers. “This finding shows that even workers who are served by a workplace hearing conservation program and receive annual hearing testing may be unaware of their actual hearing ability,” said Marjorie McCullagh, assistant professor in the U-M School of nursing and principal investigator.  “Consequently, health care providers would be wise to examine methods to help workers develop more accurate perceptions of their hearing, and test more effective methods to protect it.” Of 2,691 noise-exposed automobile factory workers surveyed for the study, 76% reported excellent or good hearing. However, after formal hearing tests, researchers found that that 42% of those workers actually suffered hearing loss. This indicates that self-reported hearing loss is poorly related to the results of audiometry, or formal hearing testing.  In other words, many factory workers might have hearing loss and not even realize there’s a problem, and the U-M findings are consistent with other studies demonstrating a discrepancy between measured and perceived hearing loss. In the U-M Nursing study, hearing loss was highly prevalent among the workers despite a regulated work environment and a hearing conservation program. Noise represents one the nation’s most common occupational health hazards.

The data was collected as part of an intervention study promoting hearing protector use among workers at a Midwest automotive factory.

 

Co-authors include Delbert Raymond, of Eastern Michigan University School of Nursing; Madeline Kerr, University of Minnesota School of Nursing; and Sally Lusk, U-M School of Nursing. The study appeared in the journal of Noise and Health. To learn more about the University of Michigan School of Nursing visit www.nursing.umich.edu.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.