Heat pump control
Bosch's DDC Controller option for FHP heat pumps operates in 100% stand-alone control mode or connects to a BAS using open protocols like BACnet, Modbus, N2, or LonWorks.
Bosch's DDC Controller option for FHP heat pumps is preprogrammed and factory installed to be job site ready. The controller is installed with the unit's Unit Protection Module, which controls the heat pump's operations and monitors the safety controls that protect it. The DDC Controller operates in 100% stand-alone control mode or connects to a BAS using open protocols like BACnet, Modbus, N2, or LonWorks. It provides real-time information on zone temperatures, leaving air and water temperatures, and more, all of which can be monitored from a central control computer/laptop with unit fault indications displayed. To complement the controller, Bosch FHP offers a line of intelligent space sensors to provide precision measurement and communication capabilities. The DDC Controller offers more than 15 available input/outputs including discharge air temperature, leaving water temperature, alarm status, and heating and cooling setpoints.
Case Study Database
Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.
These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.
Click here to visit the Case Study Database and upload your case study.