Highlights from the Sixth Annual TABB Conference

Since its inception in 2002, the Testing, Adjusting and Balancing Bureau(TABB) annual conference has grown from a small meeting of a few dozen people, to an industry standard of over 100 people—the best and the brightest in the HVAC industry. The sixth annual TABB Conference, held May 17-19 in Hartford, Conn., highlighted a year of success and laid the ground work for the challenges ahead.

06/05/2007


Since its inception in 2002, the Testing, Adjusting and Balancing Bureau (TABB) annual conference has grown from a small meeting of a few dozen people, to an industry standard of over 100 people—the best and the brightest in the HVAC industry. The sixth annual TABB Conference, held May 17-19 in Hartford, Conn., highlighted a year of success and laid the ground work for the challenges ahead.

“TABB has kept a rigorous pace, which it has maintained since its inception.logies that evolve. We need to be ready to meet that challenge—and I think we are.”

The General Session of the TABB Conference was once again designed to be full of information that will help professionals in the TAB market. Presentations and discussions included:Green Buildings and Sustainable Technology Panel, with Howard Stine of Charles E. Jarrell Contracting Co. and Ken Senteney of Superior Air Handling Systems;

Increasing the Credibility, Defensibility, and Quality of certification through Accreditation by Dr. Roy Swift, program director, personnel certification accreditation program of the American National Standards Institute;

The International Certification Board (ICB) Report, where conference attendees were able to ask questions and make comments to members of TABB’s governing body, the International Certification Board.

An indoor air quality workshop was held by the National Energy Management Institute (NEMI) prior to the start of the TABB Conference.ed Andis. “This technician certification course will help our members demonstrate a combination of knowledge and skills that are needed to assist customers in improving and maintaining IAQ in their buildings. These skills are valuable and make these technicians an important part of an IAQ team.”

The conference wrapped up with the announcement that the Seventh Annual TABB Conference will be held in Los Angeles.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.