Hospitals discover lowering HVAC costs saves energy

Healthcare facilities that implement energy conservation measures outperform their competitors by as much as 10% in net operating income, accord to EPA research.

01/05/2011


A hospital can be a stressful place — not just for patients who come for treatment, but for administrators faced with increasing HVAC costs and decreasing budgets. Energy use, in particular, is a large expense; indeed, healthcare-related research from the U.S. Environmental Protection Agency’s Energy Star program shows that energy consumption per square foot in hospitals is far higher than in many other type of building. Little wonder when you consider hospitals 24/7 operation and demanding requirements for air filtration. Risk of infection, after all, must be kept to a minimum, which means carefully filtering dangerous particles from the air.

But EPA research also shows that healthcare facilities that implement energy conservation measures outperform their competitors by as much as 10% in net operating income. Saving energy isn’t just good for the environment — it’s good for the bottom line.

Yet how do hospitals get there? How do they achieve better energy efficiency and see lower HVAC costs without sacrificing performance? Answering that question is particularly important when it comes to hospital air filtration, as only superior-quality systems can meet the requirements for patient care. Healthcare facilities depend on High Efficiency Particulate Air filtration (HEPA) — achieving a 99.7% efficiency — to prevent the spread of disease. But these air filtration systems can have great energy demands. And the strict indoor air quality required by operating rooms, emergency rooms, intensive care units, and laboratories — typically requiring 20 to 30 air changes per hour — stress budgets even further.

The answer lies in a single word: sustainability. Air filtration systems that are designed to work more efficiently, and use less energy, can do the job hospitals need at far reduced cost. Consider, for example, Camfil Farr clean air solutions — designed from the ground up with sustainability and energy efficiency in mind. Hospitals using Camfil Farr air filters are already seeing their HVAC costs drop by 15 to 30 percent. The filters use innovative technology to provide peak performance throughout their lifecycle — in stark contrast to traditional hospital air filters which degrade in efficiency over time. Camfil Farr filters need to be replaced less often — so disposal, maintenance, and replacement costs are also reduced along with energy expenses. For any healthcare facility, these are savings that quickly add up.

One of the challenges for hospitals embracing sustainability is to see how the new designs, products, and systems can pay off down the road. So Camfil Farr has introduced several tools to help healthcare facilities calculate these savings. Its Life Cycle Cost (LCC) software projects the precise cost of any air filtration system (Camfil Farr’s or a competitor’s) over the lifetime of that unit. It factors in real-world outdoor air characteristics, hours of operation, and costs for filters, labor, disposal, and energy. The software also takes into account installation issues, duct condition, and filter change outs. The LCC program lets hospitals see long-term expenses — which are a much more accurate benchmark for costs than initial price alone. Meanwhile, Camfil Farr’s mobile filter testing lab lets healthcare facilities test four combinations of filters simultaneously, under identical circumstances.

The results of these tests provide something decision-makers at healthcare facilities urgently need: an objective, scientifically valid comparison between products, making sure that hospitals make the purchase that works best for them today — and tomorrow to reduce HVAC costs.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.