HVAC products

Make-up air unit, data center cooling solution and pressure sensor.

09/04/2007


Make-up air unit offers high-efficiency heat exchanger to bring inside fresh outdoor air while exhausting a similar amount of stale, polluted air. The air is exchanged while recovering significant heat energy from the exhaust air stream and transferring only the heat energy to the supply air, thus tempering incoming air. The unit is available in 10 different models with a range for operating flows and efficiencies. Applications include schools, airports and office buildings. For more information on E-Z-Aire and Munters Corporation, click here.

Data center cooling solution is available in a nominal 25 kW rating, in addition to its current 17 kW system. The system enclosure is ideal for integrated cooling capabilities in small to mid-size data centers that are less than 1,000 sq. ft. with eight or less racks. The cooling system improves cooling efficiency by as much as 30% compared to traditional room cooling systems. The system uses water to transport heat out of the enclosure. Server heat load is absorbed by the rack’s integrated cold water system through a high-efficiency air-to-water heat exchanger at the bottom of the rack. To learn more about Liebert XDK-W and Emerson Network Power, click here.

Pressure sensor operates on a regulated 5 DC volts power supply and provides amplified linear output. The low-range sensors are ideal for variable-air-volume systems, filter pressure monitoring, duct airflow, static pressure monitor, gaseous leak detection, pneumatic controls and medical equipment applications. To learn more about MEMS-based P992/P993 Low Range Differential Pressure Sensors and Kavlico, an operation of Schneider Electric, click here.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.